3AM loop antenna
Main unit
| 4 | FM indoor antenna |
| Stand the antenna up on | Adhesive tape |
| its base. | Place the antenna |
| Keep loose antenna cord | where reception is |
| away from other wires | best. |
Click! | and cords. |
|
5Connection to your television
■Connecting a television using the VIDEO IN terminal
| Television | Connect directly to your television. | |
| Do not connect the unit through a video cassette | ||
|
| ||
VIDEO | VIDEO IN | recorder, because the picture may not be played | |
correctly due to the copy guard. | |||
OUT | |||
|
|
Simple setup
AM ANT | EXT | |
|
| |
FM ANT | LOOP | |
| 75Ω | |
|
| |
TO |
|
|
SUBWOOFER | ||
Video cable
■Connecting a television using the COMPONENT VIDEO IN terminals
Å |
h |
To household AC outlet (AC 120 V, 60 Hz)
COMPONENT |
VIDEO IN |
Y |
PB |
PR |
Y PB PR |
COMPONENT VIDEO OUT |
Video cables |
(not included)
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive output and provide a purer picture than the S VIDEO OUT terminal. Connection using these terminals outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors. ¡The description of the component video input
terminals depends on the television or monitor (e.g. Y/PB/PR,
Connect to terminals of the same color.
¡After making this connection, change the black level for a better picture (\ page 29, Video— Black Level Control).
6AC power supply cord
Connect the AC power supply cord after all other connections are complete.
Conserving power
The unit consumes power (approx. 0.5 W) even when it is turned off with [POWER 8]. To save power when the unit is not to be used for a long time, unplug it from the household AC outlet.
To enjoy progressive video
¡Connect to the component video (480P) input terminals on a television compatible with this unit’s copy guard system. (Video will not be displayed correctly if connected to an incompatible television.)
¡Press [PROGRESSIVE OUT] on the main unit so “PROGRESSIVE” appears on the display (\ page 13).
¡All televisions manufactured by Panasonic and that have 480P input connectors are compatible. Consult the manufacturer if you have another brand of television.
■Connecting a television using the S VIDEO IN terminal
Remember to reset the radio stations and any other memory items before using the unit again.
Information you enter into the unit’s memory remains intact for up to 2 weeks after the AC power supply cord is disconnected.
S VIDEO |
OUT |
S VIDEO IN
S video cable
(not included)
S VIDEO OUT terminal
The S VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance (Y) signals. (Actual results depend on the television.)
RQT6945
11