Panasonic SC-ST1 warranty Troubleshooting guide, Power, Operation

Troubleshooting guide

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem:

In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com, or the website (http://www.panasonic.com).

In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.

Reference

RQT6945

36

Power					Page
No power.			¡Insert the AC power supply cord and system cable securely.		10, 11
The unit is automatically switched			¡The unit was switched to standby by the sleep timer.		28
to the standby mode.
Operation
No response when buttons			¡Some operations may be prohibited by the disc.		–
			¡The unit may not be operating properly due to lightning, static electricity or some other		–
pressed.
			external factor.
			Reset procedure:
			Press [^] to switch the unit to the standby mode and then back to ON.
			Alternatively, press [^] to switch the unit to the standby mode, disconnect the AC power
			supply cord, and then reconnect it.
No operations can be performed			¡Check that the batteries are installed correctly.		12
with the remote control.			¡The batteries are depleted: Replace them with new ones.		12
			¡Point the remote control at the remote control sensor and operate.		12
Cannot switch on the television			¡Press [TV] first to operate the television.		32
with the remote control.
Play doesn’t start (or stops			¡Condensation has formed: Wait 1 to 2 hours for it to evaporate.		–
immediately) when you press			¡This unit cannot play discs other than the ones listed in these operating instructions.		5
[q] (play).			¡This unit cannot play DVD-Video with a region number other than “1”, “ALL” or multiple		Cover
			region numbers including “1”.
			¡The disc may be dirty and may require cleaning.		5
			¡Ensure that the disc is installed with the label of the side to be played facing upwards.		13
			¡Check that the DVD-RAM has something recorded on it.		–
Cannot eject disc			¡The unit may not operate properly if the disc is damaged or dirty.		13
			Press [POWER 8] and after the display disappears, wait a few seconds, then press
			[POWER 8] again and eject the disc.
Cannot select alternative			¡This function is dependent on software availability.		–
languages.			¡Try selecting from the disc’s menu if one is available.		14
No menu play.			¡This function is dependent on software availability.		–
No subtitles.			¡This function is dependent on software availability.		–
			¡Subtitles are cleared from the television. Display the subtitles.		17
The position of the subtitles is			¡Change the position of the subtitles with “Subtitle Position” in the on-screen menu icons.		23
incorrect.
Soundtrack and/or subtitle			¡This function is dependent on software availability.		–
language is not the one selected
with the SETUP menus.
Cannot change angle.			¡This function is dependent on software availability. Even if a disc has a number of angles		–
			recorded, these angles may be recorded for specific scenes only.
The SETUP menu cannot be			¡Select “DVD/CD” as the source.		–
accessed.			¡Cancel all group, program and random play.		16
Cannot add markers.			¡You cannot add markers while playing a play list or if the disc’s play time doesn’t appear		–
			on the unit’s display.
There are already markers.			¡The unit reads and displays the markers added with a DVD video recorder. You can clear		–
		RAM
			them but reappear when you switch the unit to standby, change the source, or open the
			loading tray.
Marker numbers added are			¡The unit numbers markers by time so they change when you add and delete them.		–
different when called up.	RAM
Cannot select random or program			¡You cannot select random or program play with some DVD-Video.		–
play.
Folders deeper than the eighth			¡Folders deeper than the eighth layer are displayed as the eighth layer.		–
layer on a data CD are not
displayed correctly.
You have forgotten your ratings			g	>	–
			¡While stopped and “DVD/CD” is the source, press and hold [	] on the unit and [=10] on
password.			the remote control for about 3 seconds until “Initialized” disappears from the television.
Reset all the SETUP settings to			Turn the unit off and on again.
Factory Preset.			All settings will return to the default values.