| OPERATION | ||
|
|
|
|
| “ | RANGE” SWITCH |
|
The “Range” switch is used to select one of three amperage ranges with generous overlap for Stick/TIG welding, or one Wire Feed welding range.
Process | Range Setting | Current Range | |
|
|
| |
STICK/TIG | |||
90 Max. | |||
50 to 90 Amps | |||
(constant current) | 145 Max. | 70 to 145 Amps | |
(3 range settings) | 210DC/225AC Max. | 120 to 210 (DC) 225(AC) | |
|
|
| |
WIRE FEED |
|
| |
(constant voltage) | 15 to 25V | Up to 200 Amps | |
(one range setting) |
|
| |
|
|
| |
|
|
|
CAUTION
Never change the “RANGE” Switch setting while welding. This will damage the switch.
“ 
CONTROL” DIAL
Provides a fine welding current adjustment within the Range Switch settings in the STICK mode and weld- ing voltage control with the Range switch set in the wire feed mode.
POLARITY SWITCH
Provides three selectable welding polarities:
AC, DC+ & DC-
CAUTION
Never change the Polarity switch setting while welding. This will damage the switch.
RANGER 3 PHASE APPROXIMATE FUEL CONSUMPTION
| KOHLER | |
| 23 H.P. COMMAND | |
|
|
|
Low Idle - No Load | .35 Gallons/Hour | |
2200 RPM | (1.34 Liters/Hour) | |
High Idle - No Load | .76 Gallons/Hour | |
3700 RPM | (2.86 Liters/Hour) | |
AC CC Weld Output | 1.23 Gallons/Hour | |
225 Amps @ 25 Volts | (4.64 Liters/Hour) | |
DC CC Weld Output | 1.38 Gallons/Hour | |
210 Amps @ 25 Volts | (5.21 Liters/Hour) | |
DC CV Weld Output | 1.22 Gallons/Hour | |
200 Amps @ 20 Volts | (4.60 Liters/Hour) | |
Auxiliary Power Single Phase | 1.52 Gallons/Hour) | |
9,500 Watts | (5.77 Liters/Hour) | |
Auxiliary Power 3 Phase | 1.64Gallons/Hour) | |
10,500 Watts | (6.23 Liters/Hour) | |
|
|
|