Makita 5077B instruction manual Fie

Switch action

To start the tool, simply pull the trigger. Release the trigger to stop.

CAUTION :

Before plugging in the tool, always check to see that the trigger switch actuates pro- perly and returns to the "OFF" position when released.

Operation

Grasp the rear handle with your right hand, the front grip with your left. Set the base plate on the workpiece to be cut without the blade making any contact. Then turn the tool on and wait until the blade attains full speed. Now simply move the tool for- ward over the workpiece surface, keeping it flat and advancing smoothly until the sawing is completed. To get clean cuts, keep your sawing line straight and your speed of advance uniform.

Guide rule

The handy guide rule allows you to do extra-accurate straight cuts. Simply slide the guide rule up snugly against the side of the workpiece and secure it in position with the wing bolt on the front of the base. It also makes repeated cuts of uniform workpiece width possible, too.

-Trigger switch

Fie. 1!

Fig. 1 6

10