Removingor installing saw blade
CAUTION :
Always b e sure that the tool is switched off and unplugged before removing or installing the blade.
To remove the blade, press the shaft lock so that the blade cannot revolve and use the wrench to loosen the hex bolt clock- wise. Then remove the hex bolt, outer flange and blade.
To install the blade, follow the removal procedure in reverse. BE SURE TO TIGHTEN THE HEX BOLT SECURELY.
|
| inner flange | \ | |
|
|
| Fig. 9 | |
CAUTION : |
| Blade | Outer flange | |
.Be sure the blade | is installed with teeth | |||
|
|
pointing up a t the front of the tool.
*Use only the Makita wrenches to install or remove the blade.
*One side of the inner flange is for 5/8" hole diameter of the blade; the other side is for 13/16" hole diameter.
I
Fig. 1(
Use the correct side for the hole diameter of the blade you intend to use. Mounting the blade on the wrong side can result in dangerous vibration.
a