Adjusting depth of cut
Loosen the lever on the depth guide and move the base up or down. At the desired depth of cut, secure the base by tightening the lever.
Fig. 1
CAUTION :
Use a shallow depth of cut when cutting thin workpiece for cleaner, safer cuts. *After adjusting the depth of cut, always tighten the lever securely.
Bevel cutting
Loosen the lever on the bevel scale plate on the front of the base. Set for the desired angle (0"
Bevel scale plats
Sighting
For straight cuts, align the l e f t notch in the front of the base with your cutting line on the workpiece. For 45" bevel cuts, align the right notch with it.
For straight | For 45" |
cuts | bevel cuts |
I 1 | Base plate |
|
I
Fig. 1
9