Accessories, Five Year Tool Limited Warranty

WARNING To reduce the risk of explo- sion, electric shock and property damage, always check the work area for hidden gas pipes, electrical wires or water pipes when making blind or plunge cuts.

Plunge Cutting

Your MILWAUKEE Sawzall® is ideal for plunge cutting directly into surfaces that can not be cut from an edge, such as walls or ﬂoors. Plunge cut- ting may be done two ways depending on how the blade is inserted. Column A shows how to plunge cut with the teeth of the blade facing downward. Column B shows how to plunge cut with the teeth of the blade facing upward. Do not plunge cut into metal surfaces (see "Cutting Metals").

3.As the blade starts cutting, raise the handle of the tool slowly until the shoe rests ﬁrmly on the workpiece. Then guide the tool along your cut- ting line to acquire the desired cut.

NOTE: To make plunge cutting easier, use a heavy gauge blade and install the blade with the teeth facing upward as shown in Column B.

Cleaning

Clean dust and debris from charger and tool vents. Keep tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean the tool, battery pack and charger since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools.

Repairs

For repairs, return the tool, battery pack and char- ger to the nearest service center listed on the back cover of this operator's manual.

ACCESSORIES

WARNING Always remove battery pack before changing or removing acces- sories. Only use accessories specifically recommended for this tool. Others may be hazardous.

For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go online to www.milwaukeetool.com. To obtain a catalog, con- tact your local distributor or a service center listed on the back cover of this operator’s manual.

1.Insert the blade into the tool.

If you inserted the blade with the teeth facing downward, hold the tool as shown in Column A, resting the edge of the shoe on the workpiece.

If you inserted the blade with the teeth facing upward, hold the tool as shown in Column B, resting the edge of the shoe on the workpiece.

2.With the blade just above the workpiece, pull the trigger. Using the edge of the shoe as a pivot, lower the blade into the workpiece as shown.

FIVE YEAR TOOL LIMITED WARRANTY

Every MILWAUKEE electric power tool (including battery charger) is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on a electric power tool which, after examination, is determined by MILWAUKEE to be defective in material or work- manship for a period of ﬁve (5) years* after the date of purchase. Return the electric power tool and a copy of proof of purchase to a MILWAUKEE factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured, are requested for this warranty to be effective. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.

*The warranty period for Hoists (lever, hand chain, & electric chain hoists), all Ni-CD battery packs, Work Lights (cord- less ﬂashlights), Job Site Radios, and Trade Titan™ Industrial Work Carts is one (1) year from the date of purchase. *The warranty period for Li-Ion battery packs that do not contain V™-technology – 4.0 volts through 18.0 volts - is two

(2) years from the date of purchase.

*There is a separate warranty for V™-technology Li-Ion Battery Packs V™18 volts and above that accompany V™- technology cordless power tools:

MAINTENANCE

*Every MILWAUKEE V™-technology Li-Ion Battery Pack 18 volts or above is covered by an initial 1000 Charges/2 Years free replacement warranty. This means that for the earlier of the ﬁrst 1000 charges or two (2) years from the date of purchase/ﬁrst charge, a replacement battery will be provided to the customer for any defective battery free of charge. Thereafter, customers will also receive an additional warranty on a pro rata basis up to the earlier of the

WARNING To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disas- semble the tool, battery pack or charger. Contact a MILWAUKEE service facility for ALL repairs.

Maintaining Tool

Keep your tool, battery pack and charger in good repair by adopting a regular maintenance pro- gram. After six months to one year, depending on use, return thetool, battery pack and charger to A MILWAUKEE service facility for:

•Lubrication

•Mechanical inspection and cleaning (gears, spindles, bearings, housing, etc.)

•Electrical inspection (battery pack, charger, motor)

•Testing to assure proper mechanical and electrical operation

If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work properly, return the tool, charger and battery pack, to a MILWAUKEE service facility for repairs.

WARNING To reduce the risk of per- sonal injury and damage, never immerse your tool, battery pack or charger in liquid or allow a liquid to ﬂow inside them.

ﬁrst 2000 charges or ﬁve (5) Years from the date of purchase/ﬁrst charge. This means that every customer gets an additional 1000 charges or three (3) years of pro rata warranty on the V™-technology Li-Ion Battery Pack 18 volts or above depending upon the amount of use. During this additional warranty period, the customer pays for only the use- able service received over and above the ﬁrst 1000 Charges/2 years, based on the date of ﬁrst charge and number of charges found on the battery pack via Milwaukee’s V™-technology Service Reader.

Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The manufactur- ing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDI- TION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.

This warranty applies to product sold in the U.S.A., Canada and Mexico only.

Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s web-site www.milwaukeetool. com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service on a MILWAUKEE electric power tool.

2620-20 specifications

The Milwaukee 2620-20 is a powerful cordless reciprocating saw that exemplifies Milwaukee's commitment to innovation and performance in the field of power tools. Designed for heavy-duty applications, the 2620-20 stands out due to its robust features and advanced technologies, making it an essential tool for professionals and DIY enthusiasts alike.

One of the key features of the Milwaukee 2620-20 is its high-performance motor, which delivers a remarkable stroke length of 1-1/8 inches, allowing for fast cutting through various materials like wood, metal, and plastics. This feature ensures that users can complete their tasks efficiently and with precision. The saw operates at a variable speed of up to 3,000 strokes per minute, providing flexibility to adjust the cutting speed based on the material being worked on.

Another significant characteristic of the 2620-20 is its lightweight design, weighing in at just 7.0 pounds. This lightweight construction contributes to user comfort and reduces fatigue during extended periods of use. The compact design makes it easy to maneuver in tight spaces, making it ideal for demolition, plumbing, and electrical work, as well as other professional-grade applications.

Milwaukee has incorporated its REDLINK Plus Intelligence technology into the 2620-20, which enhances the tool's performance and ensures optimal efficiency. This technology provides advanced overload protection and improves communication between the tool and the battery, preventing damage from overheating and extending the tool's lifespan.

The 2620-20 is compatible with Milwaukee's M18 battery system, allowing users to choose the battery that best suits their power needs. The M18 REDLITHIUM battery packs deliver superior runtime, performance, and durability, ensuring that users can work longer without the need for frequent recharging.

Additionally, the tool features a tool-less blade change system, enabling users to quickly and easily replace blades without the need for additional tools. This convenience enhances productivity and minimizes downtime during projects.

In conclusion, the Milwaukee 2620-20 is an innovative and versatile cordless reciprocating saw that combines power, efficiency, and user-friendly features. With its high-performance motor, lightweight design, advanced technology, and easy blade changes, it stands as a top choice for anyone looking to tackle demanding cutting tasks with confidence and ease. Whether for professional use or home projects, the Milwaukee 2620-20 delivers reliability and performance that users can depend on.