Milwaukee 2410-20 manual Wiring Specifications

1

2

ORIENT MOTOR ASSEMBLY WITH SLOT TO THE TOP

MOTOR

ASSEMBLY

AS AN AID TO REASSEMBLY, TAKE NOTICE OF WIRE ROUTING AND POSITION IN WIRE GUIDES AND TRAPS WHILE DISMANTLING TOOL

ROUTE WIRES 1 AND 2

THROUGH TRAPS IN

THIS AREA.

					FUEL GUAGE	WIRE TIE
					LED ASSY.
						FOR 2, 5 & 6
	3				13
					SLEEVED WIRES
					(White, black, red,	BE CAREFUL AND
5					green and gray)	AVOID PINCHING
						WIRES BETWEEN
	6
						HANDLE HALVES
	8					WHEN ASSEMBLING.
		7
				10	PCB
			4	11
				12

1

6 3

5

2

		4
8		SWITCH
	9	7
		CONNECTOR
		BLOCK
		ASSEMBLY

					WHITE
					BLACK
					RED	NOTE:
				13		POSITION CONNECTOR PORTION
						OF #13 WITH OPEN PINNED SIDE
						FACING DOWN TOWARDS THE
					GREEN	PCB (WHITE WIRE SHOULD FACE
						FRONT OF TOOL). BE SURE THAT
					GRAY	THE CONNECTOR IS FULLY SEATED.
PINNED SIDE OF CONNECTOR
	TO FACE DOWN WHEN
		INSTALLING TO
			PC BOARD

WIRING SPECIFICATIONS

				Wire	Wire	Origin or	Length	Terminals, Connectors and 1 or 2 End Wire Preparation
				No.	Color	Gauge
1					Black	23-30-0590	-----	Component of the motor assembly.
	2				Red	23-30-0590	-----	Component of the motor assembly.
	3				White	23-66-2736	-----	Component of the switch assembly.
			4		Black	23-66-2736	-----	Component of the switch assembly.
		5			Black	23-66-2736	-----	Component of the switch assembly.
		6			Red	23-66-2736	-----	Component of the switch assembly.
				7	White	23-66-2736	-----	Component of the switch assembly.
				8	Red	23-66-2736	-----	Component of the switch assembly.
		9			Red	23-66-2736	-----	Component of the switch assembly.
		10			Yellow	23-66-2736	-----	Component of the switch assembly.
				11	Blue	23-66-2736	-----	Component of the switch assembly.
				12	Black	23-66-2736	-----	Component of the switch assembly.
13					Sleeve	23-66-2736	-----	Component of the switch assembly / fuel gauge LED.