General Specifications

The Wilton 20 Inch Variable Speed Drill presses Models 2221VS, 2223VS, 2232AC, and 2234AC are available in manual speed control or inverter speed control configuration. Electrical power options are single-phase, 115 and 220 volts, or 3-phase, 440 volts.

Specifications

Manual Speed Control Models	Inverter Speed Control Models
Drilling Capacity	2221VS	2223VS	2232AC	2234AC
Drilling Capacity
Cast Iron	1-1/4 In	1-1/4 In	1-1/2 In	1-1/2 In.
Steel	1 In	1 In	1-3/8 In	1-3/8 In.
Spindle to Table (Max.)	32-3/8 In	32-3/8 In	32-3/8 In	32-3/8 In.
Spindle to Base (Max.)	44-1/2 In	44-1/2 In	44-1/2 In	44-1/2 In.
Spindle to Column (Max.)	10-7/16 In	10-7/16 In	10-7/16 In	10-7/16 In.
Motor
Rating	2 hp, 1-Phase	2 hp, 3-Phase	2 hp, 3-Phase	2 hp, 3-Phase
Voltage	115/220 V	220/440V	220V	440V
Pre-wired Voltage	115 V	220V	220V	440V
T-Slots (Table/Base)
Number	2	2	2	2
Size	5/8 In	5/8 In	5/8 In	5/8 In.
Column Diameter	4-1/2 In	4-1/2 In	4-1/2 In	4-1/2 In.
Spindle
Travel	6 In	6 In	6 In	6 In.
Taper	MT-3	MT-3	MT-3	MT-3
RPM (Variable)	300-2000	300-2000	65-2000	65-2000
Quill
Diameter	3 In	3 In	3 In	3 In.
Travel	6 in	6 in	6 in	6 in.
Table
Overall	22x18-3/4 In	22x18-3/4 In	22x18-3/4 In	22x18-3/4 In.
Working Surface	18-1/8x14-3/4	18-1/8x14-3/4	18-1/8x14-3/4	18-1/8x14-3/4
Travel	32-3/8 In	32-3/8 In	32-3/8 In	32-3/8 In.
Base
Overall	26x19 In	26x19 In	26x19 In	26x19 In.
Working Surface	15-1/4x12-1/16	15-1/4x12-1/16	15-1/4x12-1/16	15-1/4x12-1/16
Overall Dimensions
Length	34-1/4 In	34-1/4 In	36-5/8 In	36-5/8 In.
Width	27 In	27 In	27 In	27 In.
Height	77-1/4 In	77-1/4 In	82-1/4 In	82-1/4 In.
Weight
Net	715 lbs.(325 kgs) ...	715 lbs.(325 kgs)	715 lbs.(325 kgs) ...	715 lbs.(325 kgs)
Gross	803 lbs.(365 kgs) ...	803 lbs.(365 kgs)	792 lbs.(360 kgs) ...	792 lbs.(360 kgs)

1.All work shall be secured using either clamps or a vise to the drill press table. It is unsafe to use your hands to hold any workpiece being drilled.