Lincoln Electric warranty Power MIG 255XT Spool GUN Solutions, Magnum SG Spool GUN

A CLOSER LOOK

Improved Spool Gun Operation!

It’s easy to start welding with a spool gun. Set wire feed speed at the gun – see the pre-set wire feed speed displayed on the

FasterPOWERset-MIGup –®255XTNo moremeterguessing. on wire feed speed!

Adjust speed on the gun and watch the wire feed speed

change on the POWER MIG ® 255XT.

POWER MIG® 255XT SPOOL GUN SOLUTIONS

The economic Magnum® SG or premium Magnum® 250LX spool guns are recommended for easy changeovers to a second electrode mate- rial such as stainless steel or aluminum.

Avoid the time-consuming liner, contact tip, drive roll and machine polarity changes necessary when preparing your machine’s wire drive

for use with those materials. Spool guns are especially recommended for feeding soft aluminum wire.

Lincoln’s spool guns accommodate 4" (100 mm) diameter 1 lb. (.45 kg) spools and feature convenient wire feed speed control at the gun handle.

MAGNUM® SG SPOOL GUN

•250A, 60% duty cycle.

•.025" - 3/64" (0.6 -1.2 mm) electrode diameter capability.

•Wire feed speeds from 50-650 ipm (1.2 -16.5 m/min.).

•25 ft. (7.6 m) gun cable length – compare to the competition.

•Adjustable speed control at the handle – allows you to tailor the WFS setting at the gun.

•See E12.22 for Expendable Parts.

•Order K487-25 spool gun and K2445-1 control cable adapter.

MAGNUM® 250LX SPOOL GUN -FACTORY READY

•300A, 60% duty cycle.

•.025” - 3/64" (0.6-1.2 mm) electrode diameter capability.

•Wire feed speeds up to 800 ipm (20.3 m/min.).

•25 ft. (7.6 m) gun cable length with 7-pin MS-Type Connector.

•WFS control for fine adjustment of wire feed speed at the gun.

•Zippered cable jacket is standard.

•See E12.25 for Expendable Parts.

•Order K2490-1.

ONE-PAK®(K2702-1) INCLUDES:

•POWER MIG® 255XT (K2701-1)

•Magnum® 250LX Spool Gun (K2490-1)

•Spool Gun Holder (K1738-1)

•Dual Cylinder Mounting Kit (K1702-1)

•Extra Regulator (K586-1)

	POWER MIG	® 255XT
[5]	www.lincolnelectric.com