I-Fly Wireless Router ADSL

1.5 Hardware Installation

Power on

Connect the Adapter to power inlet and turn the power switch on, this product will enter a self-test phase. When it is in the self-test phase, the indicators READY LED will be lighted ON for about 8 seconds, and the READY LED will be flashed to indicate that the self-test phase has finished. Finally, the READY LED will be flashed to indicate that router is in normal operation.

ADSL connection

Simply plug one end of the cable into the ADSL port (RJ-11 receptacle) on the rear panel of the Router and insert the other end into splitter .

Connect Router to LAN

Prepare an Ethernet cable to connect Router to Hub or Switch of your LAN. You can connect Router to your PC directly by crossover Ethernet cable.

6

Page 12
Image 12
Atlantis Land Network Router manual Hardware Installation, Power on, Adsl connection, Connect Router to LAN