Atlantis Land Network Router manual Encapsulation, Service Category Select UBR or CBR

I-Fly Wireless Router ADSL

Enabled? : Select Yes if you want to enable the settings of this VC or select No if you want to disable the settings of this VC.

VPI: Consult the telephone company to get the Virtual Path Identifier (VPI) number. The default value is 0.

VCI: Consult the telephone company to get the Virtual Channel Identifier (VCI) number. The default value is 32.

Static IP Address: Enter the information provided by your ISP.

Subnet Mask: Enter the information provided by your ISP.

ATM

Service Category: Select UBR or CBR.

Bandwidth: Enter the bandwidth.

ENCAPSULATION

There are eleven ways ― PPPoE VC-Mux, PPPoE LLC, PPPoE None, PPPoA VC-Mux, PPPoA LLC, 1483 Bridged IP VC-Mux, 1483 Bridged IP LLC, 1483 Routed IP VC-Mux, 1483 Routed IP LLC, Classical IP over ATM, Native ATM ― for the device to have a public IP address and then to access Internet. You have to check with your ISP about which way is adopted.

BRIDGE

If you set this device to be bridge mode, select Enable; if not, please select Disable.

IGMP

You can Enable or Disable this function.

PPP

If your encapsulation is set to be PPPoE or PPPoA, the following fields must be entered.

Service Name: This item is for identification purpose. If it is required, your ISP will provide you the information. Maximum input is 31 alphanumeric characters.

Username: Enter the username provided by your ISP.

Password: Enter the password provided by your ISP.

Disconnect Timeout seconds: Auto-disconnect the ADSL Router when there is no activity on the line for a predetermined period of time. You can input any number from 0 to 32767. The default value is

0seconds.

Authentication: Default at “Auto”.

Automatic Reconnect: Check to enable this device to automatically re-establish the PPPoE session when disconnected by ISP.

DHCP

34