RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit- (400 AMP Capacity) which includes:
•Electrode Holder & Cable
•Work Clamp & Cable
•Headshield
K875 Accessory Kit- (150 AMP Capacity)
WIRE FEED
K449 LN-25- Includes internal contactor for across the arc operation (no control cable). Provides “cold” electrode until gun trigger is pressed. Includes gas solenoid.
Magnum Gun and Magnum Gun Connector Kit are required for gas-shielded welding. Innershield Gun is required for gasless welding.
K126-2Magnum 350 Innershield Gun
K1802-1Magnum 300 MIG Gun (for LN-25)
K470-2Magnum 300 MIG Gun (for LN-15)
K466-10Connector Kit (for LN-15, K470-2)
K1500-1Gun Receiver Bushing (for LN-15 & K126-2) K1870-1LN-15 Across the Arc Model
TIG
Magnum™ TIG Torch
K1783-4 - TIG Torch
Magnum Parts Kit and Argon Gas
K930-2 TIG Module - Provides high frequency and shield- ing gas control.for AC and DC GTAW (TIG) welding applica- tions. Its compact case is designed foe easy carrying, com- plete with a handle. High frequency bypass is built in Requires K938-1Contactor Kit, K936-3Control Cable, and K814 Arc Start Switch.
K938-1Contactor Kit - For use with TIG Module, Provides a “cold” electrode until the triggering device (Arc Start Switch) is pressed.
K936-3Control Cable - Connects TIG Module to Ranger® 250 GXT.
Optional TIG Equipment:
K939-1Docking Kit - For Mounting the K930-2 TIG Module on top of the Ranger® 250 GXT.
K937-45Control Cable Extension - Allows TIG Module to be operated at distances up to 200ft. from the power source. Available in 45ft. (13.7m).
K963-3Hand Amptrol
K870 Foot Amptrol
REMOTE OUTPUT CONTROL
(See Operations Section for reference)
The Ranger® 250 GXT is equipped with a 6-pin connector. The 6- pin connector is for connecting the K857 or K857-1Remote Control (optional) or for TIG welding, the K870 Foot Amptrol or the K963-3 Hand Amptrol. When remote con- trol is used set the LOCAL / REMOTE switch in the "REMOTE" position.
Plasma
K1580-1Pro-Cut 55
(Requires Full KVA Adapter K1816-1)
