A CLOSER LOOK
QUALITY AND RELIABILITY
•Printed circuit boards are
•Thermostat and voltage overload protection.
•
SYSTEM SELECTION
HOW MANY KILOWATTS DOES YOUR PROCESS REQUIRE?
Description | Diameter in. (mm) | Process | Kilowatts Used(1), |
|
|
|
|
.035 (0.9) | 300 ipm WFS, 130A, 24V | 3.4 | |
.035 (0.9) | 600 ipm WFS, 195A, 30V | 6.4 | |
| .045 (1.2) | 300 ipm WFS, 185A, 28V | 5.7 |
|
| 500 ipm WFS, 255A, 29V | 8.1 |
| .052 (1.3) | 250 ipm WFS, 210A, 26V | 6.0 |
|
| 450 ipm WFS, 315A, 29V | 10.4 |
| 1/16 (1.6) | 200 ipm WFS, 255A, 26V | 7.3 |
|
| 350 ipm WFS, 350A(2), 29V | 11.2 |
Flux Cored Wire | 5/64 (2.0) | 200 ipm WFS, 280A, 30V | 10.1 |
| 300 ipm WFS, 350A(2), 32V | 13.7 | |
MIG Wire | .035 (0.9) | 150 ipm WFS, 120A, 19V | 2.5 |
|
| 250 ipm WFS, 175A, 22V | 4.2 |
| .045 (1.2) | 125 ipm WFS, 145A, 19V | 3.0 |
|
| 200 ipm WFS, 200A, 21V | 4.6 |
Stick (7018) | 1/8 (3.2) | 130A, 27V | 3.9 |
| 3/16 (4.8) | 225A, 28V | 6.9 |
Stick (7024) | 3/16 (4.8) | 260A, 27V | 7.7 |
Stick (6010) | 1/8 (3.2) | 120A, 36V | 4.7 |
|
| NOTE: E6010 stick electrodes require higher |
|
|
| voltage to “whip” properly. Higher voltage power |
|
|
| sources are recommended. |
|
Air Carbon | 1/4 (6.4) | 350A(2),, 34V | 13.1 |
Arc Gouging | 3/8 (9.5) | 700A(2),, 34V Requires two | 26.2 |
|
|
|
|
(1)Power Source KW = (KW)arc1 + (KW)arc2 + (KW)arcN(simultaneous) = KW input to
.91 eff.
(2)Maximum rated output of
POWER SOURCE/KILOWATTS AVAILABLE
| 4 | Kilowatts Available | ||
| Power Source | @60V Output | ||
|
|
| ||
|
|
|
|
|
|
| 12 |
| |
|
|
|
|
|
|
| 12 |
| |
|
| 15 |
| |
|
|
|
|
|
|
| 36 |
| |
|
|
|
|
|
|
| 30 |
| |
|
| 94 |
| |
|
|
|
|
|
| Classic 300D |
| 12 |
|
|
|
|
|
|
|
| 22 |
| |
| Vantage 300(2) |
| 4.8 |
|
| Vantage 500(1) |
| 5 |
|
| Air Vantage 500(1) |
| 5 |
|
System Selection is determined by kilowatts available on the power source.
Note: For maximum output, set power source on Constant Current and select maximum output. Constant Voltage power sources are not recommended.
(1)Air Vantage and Vantage 500 output is 12 kW @ 58 volts.
(2)Vantage 300 output is 7 kW @ 58 volts.
[3] | www.lincolnelectric.com |