Arc Performance, Con’T | Lincoln Electric 350MP specs

A CLOSER LOOK

ARC PERFORMANCE, CON’T.

Lincoln Nextweld® Innovations for Challenging Applications

Waveform Control Technology® makes it possible to take advantage of Lincoln innovations like these patented processes using the Power MIG® 350MP power source:

Pulse-On-Pulse™uses a sequence of varying pulse wave shapes to produce a TIG-like bead appearance and excellent weld properties when MIG welding aluminum. Pulse-On-Pulse™controls arc length and heat input together, making it easier to achieve good penetration.

For more information see Nextweld ® Document NX-2.10

Pulse-On-Pulse™on 3 mm Aluminum

Power Mode® uses high-speed regulation of output power to deliver extremely fast response to changes in the arc, for example, when using a whip technique. The result is improved MIG welding performance, including low spatter, very uniform, consistent bead wetting and controlled penetration. Power Mode benefits are especially apparent on low voltage applications on thin steel and stainless steel material less than 20 gauge (0.7 mm). It also delivers excellent arc characteristics on aluminum and other alloys such as silicon bronze and nickel alloys.

For more information see Nextweld ® Document NX-2.60

Power Mode reduces spatter and	Power Mode aids bead
improves bead appearance,	wetting and penetration
even for low voltage	on aluminum.
procedures on stainless.

WELDING CURRENT

PULSE FREQUENCY

	Peak		Pulsed MIG varies weld current between peak (high heat)
			and background (low heat) current to provide better control of
Ramp Up			heat input, which minimizes warping and burnthrough on thin
Ramp Up	Tail Out		materials. Pulsed MIG also enables flat, horizontal, vertical up,
	Tail Out
			or overhead welding without a slag system. It can be used in
Background		Step Off	hard automation, robotic, and high production semiautomatic
Background			applications. Optimized GMAW-P waveforms are readily avail-
TIME

			able to use on aluminum, carbon steel, high strength low alloy
			steel, stainless steel, and nickel alloys.
			For more information see Nextweld ® Document NX-2.70
Low Heat	High Heat
(Background)	(Peak)

Synergic MIG

Synergic control of voltage and wire feed speed allows you to set weld procedures with only one control for simplicity and ease of use.

Set the wire feed speed and your voltage is automatically set. Override the setting with the voltage/trim control for personal preference.

2.Voltage is auto- matically set.

1.Use one knob to set procedures.

Power MIG® 350MP

[3]	www.lincolnelectric.com