Lincoln Electric 350MP warranty Push Gun Spool Gun Push-Pull Gun, Features, Con’T, Key Controls

A CLOSER LOOK

FEATURES, CON’T.

Key Controls

Easy to use controls for high productivity and accurate settings.

A.Continuous WFS/Amps Control – In wire feed welding, adjusts wire feed speed. In stick or TIG modes, adjusts amperage.

B.Continuous Volts/Trim Control – Adjusts voltage when MIG welding. Adjusts the arc length (trim) when Pulse-MIG welding.

Professional’s Choice – weld with traditional manual control or take advantage of the included MSP3 digital panel for high tech weld features:

1.Weld Mode – Many synergic modes to select from for simple one-knob control.

2.Preflow – Adjustable timer to initiate gas flow before the arc.

3.Post-Flow – Further protect your weld integrity by automatically setting the gas to run a few seconds after the trigger is released.

4.Run-In – Adjustable speed at which wire strikes the plate to enhance starting.

5.Start Procedure – Set start procedure, wire feed speed and volts for an adjustable starting time.

6.Arc Control – Set arc control to crisp or soft depending on your preference and application. In pulsed MIG, this control varies the pulse frequency and background current. In Stick mode, it adjusts the arc force.

7.Crater Control – Adjusts the ending weld procedure and ramp down time.

A

B

1-9

1

8.Burnback – Adjustable time delay between turning off the arc and the wire feed to prevent wire sticking to the puddle.

9.Spot Timer – Adjustable arc time for repetitive tack and spot welds.

3 Ways To Feed Aluminum

Good Better Best

Push Gun	Spool Gun	Push-Pull Gun
Good for occasional	Better feeding with	Best performance for production
aluminum work	integrated 2 lb. spools	aluminum welding - Use larger spools.

Python®-PlusAir-Cooled Push-Pull Guns

Features the same Magnum® back end as the Magnum® 300 gun, eliminating the need for the K2154-1 adapter. Effortless, fast changes between Magnum® 300 MIG gun and Python®-Pluspush-pull gun.

•15 ft. (4.5 m) Order K2447-1

•25 ft. (7.6 m) Order K2447-2

•50 ft. (15.2 m) Order K2447-3

(Note: Standard air-cooled and water-cooled Python®, CobraMax™ and Prince® XL push-pull guns still require the K2154-1 connection kit.)

Base Unit Includes:

Push Model (K2403-1):Power MIG® 350MP, Magnum® 300 Gun 15 ft. (4.5 m), .035" (0.9 mm)/.045" (1.2 mm) Drive Rolls and Guide for Steel, Regulator and Hose, Work Clamp and Cable, 230V Input Cord and Plug.

Push-PullOne-Pak®Model (K2451-2):Includes Power MIG® 350MP (K2403-1) push model, Python®-Pluspush-pull gun 25 ft. (K2447-2), 3/64 Aluminum Drive Roll Kit (KP1695-3/64A).

Power MIG® 350MP

[5] www.lincolnelectric.com