RECOMMENDED OPTIONS
GENERAL OPTIONS
Dual Cylinder Mounting Kit
Permits
Order K1702-1
Canvas Cover
Protect your Power MIG® when not in use. Made from attractive red canvas that is flame retardant, mildew resistant and water repel- lent. Fits any Power MIG® machine with or without a gas cylinder in the cylinder rack. Will not fit if spool gun holder is attached to the machine.
Order
STICK OPTIONS
Accessory Kit
Complete kit for stick welding. Includes 30 ft. (9.1 m) electrode cable, 25 ft. (7.6 m) work cable, headshield, work clamp and electrode holder.
Order K875 for 150 amps Order K704 for 400 amps
Remote Output Control
Consists of a control box with choice of two cable lengths. Permits remote adjustment of output.
Order K857 for 25 ft. (7.6 m) Order
TIG OPTIONS
TIG Torch
Order
for 12.5 ft. (3.8 m) length,
Order
for 25 ft. (7.6 m) length,
TIG Torch
Order
for 12.5 ft. (3.8 m) length,
Order
for 25 ft. (7.6 m) length,
Parts Kits
Magnum® Parts Kits provide all the torch accessories you need to start welding. Parts kits provide collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable box. Order KP508 for
Foot Amptrol®
Provides 25 ft. (7.6 m) of remote current control for TIG welding.
Order K870
Hand Amptrol®
Provides 25 ft. (7.6 m) of remote current control for TIG welding.
Order K963-3
Arc Start Switch
Needed if an Amptrol® is not used when TIG welding. Comes with a 25 ft. (7.6 m) cable. Attaches to the TIG torch for convenient finger control.
Order K814
Cut Length Consumables
TIG welding filler metals are avail- able for welding stainless steel, mild steel, aluminum and copper alloys.
See publication C9.10
WIRE FEEDER OPTIONS
Aluminum Feeding Kit
Conversion kit for welding with 3/64" (1.2 mm) aluminum wire. Includes drive rolls, contact tips (qty. 2), polished wire guides and cable liner.
Order
Allows guns with a
Order
Power MIG® 350MP
[6] | www.lincolnelectric.com |