Setting Up and Using Your PC
Connecting the Power Cord
WARNING For your safety always connect equipment to a grounded wall outlet. Always use a power cord with a properly grounded plug, such as the one provided with the equipment, or one in compliance with your national safety standards. This equipment can be disconnected from the power by removing the power cord from the power outlet. This means the equipment must be located close to an easily accessible power outlet.
If your PC has no rear voltage selection switch
If your PC has no voltage selection switch at the rear, this means that it is able to detect the voltage automatically. Automatic voltage selection is available only on some models, and in some countries.
If your PC is equipped with a rear voltage selection switch
1Remove the warning label covering the PC’s power connector, and ensure that the voltage setting is correct for your country. (The voltage is set during manufacture and should already be correct.)
Voltage
Selection
Switch
Setting Up and Using Your PC
2Connect the power cords to the rear of the monitor and the computer. (The connectors are shaped to go in one way only).
3Connect the monitor’s power cord and the computer’s power cord to a grounded outlet.
WARNING
4
