Technical Characteristics
Technical Characteristics
Replacing the Battery
To change the battery:
1Disconnect the PC’s power cord and remove the cover.
2Remove the old battery by sliding it from under the retaining clip.
Retaining clip |
| Battery holder |
|
|
3Place the new battery in the battery holder ensuring it is correctly seated with the clips in place.
4Replace the PC’s cover and connect the power cord.
5Run the Setup program to reconfigure the PC.
The battery in this PC is a lithium battery which does not contain any heavy metals. Nevertheless, in order to protect the environment, do not dispose of batteries in household
Note waste. Please return used batteries either to the shop from which you bought them, to the dealer from whom you purchased your PC, or to HP so that they can either be recycled or disposed of in the correct way. Returned batteries will be accepted free of charge.
Operating temperature and humidity ranges may vary depending on the mass storage devices
Note installed. High humidity levels can cause improper operation of disk drives. Low humidity ranges can aggravate static electricity problems and cause excessive wear of the disk surface.
The power consumption and acoustics figures given in the tables below are valid for the standard configuration as shipped. These figures will vary if some components are changed or added to in the initial configuration. For more information, refer to the product’s data sheet at HP’s web site: www.hp.com/go/library
When the computer is turned off with the power button on the front panel, the power consumption falls below 5W, but it is not zero. The special on/off method used by these computers considerably extends the lifetime of the power supply. To reach zero power consumption in “off” mode, either unplug the power outlet or use a power block with a switch.
Technical Characteristics
23
