MSP4 and Memory Panel

A CLOSER LOOK

PERFORMANCE

WHAT IS NEXTWELD®?

Nextweld integrates Lincoln’s technologies, processes and products to create a comprehensive, flexible, user-friendly welding system that can increase efficiency and reduce fabrication costs.

Memory panel

Up to six user settings and two procedure settings can be saved and retrieved using the Memory Panel. Allows the operator to save weld parameters and set-up options, such as Timers, Start Options, End Options, AC Controls, etc., before welding begins.

Weld Procedure Limit Controls

The MSP4 panel can be configured to limit the operator’s range of control of weld procedure settings (Wire Feed Speed, Crater Time, Burnback Time, etc.)

Lockout/Security Controls

Configurations that prevent the operator from changing authorized weld settings can be set at four different lockout levels to provide a custom level of control.

Mode Select Lockout

Locks START/END Options, AC Controls, Weld Modes and Wave Options – or various combinations of each.

Memory Panel Lockout

Locks any or all of six memories saved.

Encoder Panel Lockout

Locks either right, left or both control knobs.

Full Lockout

Locks all functions listed above.

Infrared IR Port

Weld Manager™, the Lincoln Electric Palm® OS-based software product, builds upon the usability and efficiency of the Power Feed 10M user interface design. It offers remote access and availability to system information, set-up, and configuration, allowing you to manage your Power Wave system from the palm of your hand. The versatile design allows for wireless communication with the Infrared Port on the Power Feed 10A Controller or through a serial connection and your cradle - the decision is yours.

•Quick and easy user interface set-up that can be transferred across Power Feed/Power Wave systems.

•Ensure parameters are maintained by locking out numerous options on the user interface panel.

•Easily set-up the system and ensure repeatability between multiple cells by transferring memory through a 'back-up'/'restore' or a memory 'clone'.

•Verify current system information right on the production floor.

•Ensure security of the loaded settings through password protection.

•Any Palm Operating System version 3.5 or higher.

	Power Feed 10A Controller
[3]	www.lincolnelectric.com