A CLOSER LOOK
FEATURES
A Closer Look
3.
1.
4.
1.5. 4.
2.
Power Feed 10A Control Panel
The Power Feed 10A control panel controls and monitors the advanced capabilities of the Power Wave AC/DC 1000 in a single, simple, easy-
| Dual Display Dual Encoder Panel | |
| 1. Wire feed speed (WFS) or amps. | |
2. | 2. Voltage | |
| 3. Arc Established Indicator - illuminates when a true arc has been established. | |
| 4. | ® Status LED - indicates system component ArcLink communication |
|
| status. Normal operation is a steady green light. |
| Switch Panel |
| ||
| 1. START | – | Starts the weld sequence, using strike controls. | |
3. | 2. STOP | – | Stops the weld sequence, using crater/burnback controls. | |
3. INCH | – | Up/Down. Inches wire up or down without welding current | ||
| ||||
| 4. FLUX FILL– | Activates flux hopper. | ||
| 5. TRAVEL– | Controls motion in either manual or automatic modes. | ||
Remote Pendant - The switch panel can be removed and used as a handheld pendant for remote control.
1.
2.
3.
4.
5. Auxiliary Circuit Access Holes
1. | 2. | 3. | 4. | 5. |
| Power Feed 10A Controller |
[2] | www.lincolnelectric.com |