Lincoln Electric 10A Power Feed 10SFM Motor Conversion Kit, Order K2311-1 ArcLink Cable 5-pin

RECOMMENDED OPTIONS

GENERAL OPTIONS

Power Feed 10SFM Motor

Conversion Kit

Used to convert NA-series wire drives into PF-10S wire drives. Includes an ArcLink™ motor retrofit kit used to replace existing motor on NA-3, 4 or 5 wire feed head. For use with NA-series gear head.

Order K2311-1

ArcLink Cable (5-pin)

Includes two leads plus two mating terminals. Connects Power Feed 10A controller to Power Wave AC/DC 1000.

Order K1543-XX

Flux Hopper for Tandem Arc

Flux Hopper for K387 mountings.

Order K389

Feeder Control Cable (14-pin) Connects Power Wave AC/DC 1000 to wire feeder.

Order K1785-xx

Contact Nozzle Assembly

Single arc contact nozzle assembly for 1/8" (3.2 mm) diameter wire. Operates at currents generally below 600 amps. Outer flux cone gives full flux coverage with minimum consumption.

Order K231-x

Contact Jaw Assembly

Single arc contact jaw assembly for 1/8-7/32" (3.2-5.6 mm) diameter wire. Rugged contact jaws for maximum life at currents over 600 amps.

Order K226R

Positive Contact Assembly

For single arc welding at high currents (optional T12928 water cooling attach- ment recommended when Innershield® welding over 600 amps).

Order K148x

Linc-Fill® Long Stickout Extension Linc-Fill long stickout extension for K148A Single Arc Positive Contact Nozzle Assembly. Required for long stickout technique.

Order K149-x

Narrow Gap Deep Groove Nozzle For single arc 3/32" (2.4 mm) diameter wire welding on thick walled steel plate with nearly parallel-sided, narrow gap joint preparations.

Order K386

Concentric Flux Cone Assembly For use with K148B, Positive Contact Nozzle Assembly. Gives concentric flux coverage around the electrode.

Order K285

Tandem Arc Framework

Provides mountings with desired posi- tioning adjustments for two standard Automatic Wire Feed Heads. Includes insulation and hardware to permit direct mounting to a high capacity TC-3 Carriage, or to the user's gantry or fixture for either direction of travel.

Order K387

Tandem Reels

Two Wire Reel Mounting for TC-3.

Order K390

Large Wire Twinarc® Contact Assemblies

Feeds two 5/64" (2.0 mm), 3/32" (2.4

mm)or 1/8" (3.2 mm) wires for sub- merged arc welding on "Fast-Fill" joints or hardfacing beads.

Order K225

Tiny Twinarc® Contact Assemblies Feeds two electrodes for high speed submerged arc welds. Includes contact nozzle, wire guides, drive rolls and guides, and a second wire reel and mounting bracket.

Order K129-x

Tiny Twinarc Solid Wire Straightener Straightens wire diameters .045 thru 3/32" (1.2 thru 2.4 mm). Particularly valuable on longer electrical stickout procedures.

Order K281

TC-3 Self-Propelled Travel Carriage Carries head and controls in either direc- tion on a beam. Operates manually or automatically with the weld controls. Requires 115V AC 50 or 60 hertz input power.

Order K325S, F, HCS, HCF

Vertical Lift Adjuster

Provides 4" (102 mm) hand crank adjustment of vertical head position. It also includes up to 3-3/4" (95.2 mm) in- and-out horizontal adjustment with stops that can be preset for simple rep- etition of the same adjustment.

Order K29

Horizontal Adjuster

Provides crank adjustment of head posi- tion. Has 2" (51 mm) horizontal travel.

Order K96

Wire Reel Assembly for 50-60 lb. Coils Accommodates 50 lb. (22.7 kg) or 60 lb. (27.2 kg) coils of wire on automatic wire feeders. The unit includes a wire reel mounting spindle and braking system.

Order K299

	Power Feed 10A Controller
[7]	www.lincolnelectric.com