Friedrich ZQ10 A10B manual Disassembly Instructions, Mechanical Parts, Front Grille, Cabinet

Page 5

2. DISASSEMBLY INSTRUCTIONS

— Before disassembling, turn the POWER SWITCH to OFF and disconnect the power cord.

2.1 MECHANICAL PARTS

2.1.1 FRONT GRILLE

1.Open the INLET GRILLE downward and remove the air filter.

2. Remove the screw which fastens the FRONT GRILLE.

3. Pull the FRONT GRILLE from the right side.

4. Remove the FRONT GRILLE.

5. Re-install the component by referring to the above removal procedure. (See figure 1)

Figure 1

Shipping screws

2.1.2 CABINET

1. After disassembling the FRONT GRILLE, remove two screws which fasten the CABINET at both sides.

2. Remove two screws which fasten the CABINET at back.

3. Pull the BASE PAN forward. (See figure 2)

2.1.3 CONTROL BOX

1.Disconnect the unit from the power source.

2.Remove the front grille. (Refer to section 2.1.1)

3.Remove the cabinet. (Refer to section 2.1.2)

4.Remove the screw which fastens the control box cover.

5.Remove the housing which connects motor wire in the control box.

6.Remove the 3 leads from the compressor.

(Refer to section 2.3.1)

7.Discharge the capacitor by placing a 20,000 ohmresistor across the capacitor terminals.

8.Remove the 2 screws which fasten the control box.(See Figure 3)

9.Pull the control box forward completely.

10.Re-install the components by referring to the removal procedure, above. (See Figure 3) (Refer to the circuit diagram found on page 24 in this manual or on the control box.)

Figure 2

Figure 3

— 5—

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Room Air Conditioner Service and Parts Manual ZStarTM Preface ContentsModels SpecificationsZQ10A10B ItemsControl only Model FeaturesControl Locations Mechanical Parts Disassembly InstructionsFront Grille CabinetFAN and Shroud AIR Handling PartsAIR Guide and Blower Overload Protector Electrical PartsCompressor CapacitorThermostat Power CordRotary Switch Condenser Refrigerating CycleEvaporator Capillary TubePage Pulling Vacuum Select the Best Location InstallationInstallation Hardware Storm Window Requirements Window RequirementsWood Pieces Width Minimum 1 1/238mmBefore Installation Preparing the Unit for InstallationInstall the Case in the Window To Reverse the Grille Opening Install the AIR Conditioner in the CaseOutside Dimensions Troubleshooting GuideEvaporator Coil Piping SystemIneffective Cooling Troubleshooting GuideFails to Start Complaint Cause Remedy Room AIR Conditioner Voltage LimitsName Plate Rating Minimum Maximum Complaint Cause Remedy Complaint Cause Remedy Circuit Diagram Schematic DiagramDescription QTY PER SETExploded View Model ZQ10A10B Replacement Parts ListControl BOX Assy Use Factory Certified Parts

ZQ10 A10B specifications

The Friedrich ZQ10 A10B is a prominent industrial solution designed for efficient and reliable air conditioning and heating applications. Engineered with advanced technologies, this unit stands out in its category due to its versatility, energy efficiency, and user-friendly features.

At the heart of the ZQ10 A10B is its robust refrigeration cycle, utilizing an environmentally friendly refrigerant that aligns with modern sustainability practices. This refrigerant not only minimizes the environmental impact but also ensures optimal performance across varying temperature conditions. The system's high cooling and heating capacities make it suitable for both residential and commercial settings.

One of the key characteristics of the ZQ10 A10B is its smart inverter technology. This innovation allows the unit to adjust its power consumption based on the current load requirements, providing significant energy savings over traditional fixed-speed systems. By operating at variable speeds, the system enhances comfort levels while reducing operational costs, making it an attractive option for budget-conscious consumers.

Moreover, the ZQ10 A10B integrates a sophisticated microprocessor control system, enabling precise temperature regulation and simplified user interaction. This intuitive control interface allows users to easily program settings and monitor system performance, leading to a higher degree of comfort and convenience.

The unit is also designed for quiet operation, featuring a sound-dampening casing that minimizes noise levels. This is particularly advantageous in residential environments where noise disturbance can be a significant concern. Additionally, the ZQ10 A10B is equipped with advanced filtration technologies that improve indoor air quality by effectively capturing dust, allergens, and other airborne pollutants, ensuring a healthier living space.

Durability is another hallmark of the Friedrich ZQ10 A10B. Built with high-quality materials, the unit is resistant to corrosion and wear, promising longevity and consistent performance throughout its lifecycle. This resilience makes it a reliable choice in harsh environmental conditions.

Integrated with smart connectivity features, users can control the ZQ10 A10B remotely via smartphone applications, allowing for greater flexibility and ease of use. This integration aligns with the growing trend of smart home technology, appealing to tech-savvy consumers looking for greater control over their heating and cooling systems.

In conclusion, the Friedrich ZQ10 A10B emerges as a leading solution in the HVAC market, combining innovative technology with user-focused design. Its energy efficiency, durability, and advanced features make it a smart investment for anyone looking to enhance their home or business climate control systems while keeping an eye on environmental impact.
Top Page Image Contents