Personal Safety, Tool Use and Care | Makita DA3010F specs

5.Avoid body contact with grounded sur- faces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

8.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

Personal Safety

9.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

10.Dress properly. Do not wear loose cloth- ing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

11.Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

12.Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

13.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

14.Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Ordinary eye or sun glasses are NOT eye protection.

Tool Use and Care

15.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

16.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

17.Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

18.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

19.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

20.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

21.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool ser- viced before using. Many accidents are caused by poorly maintained tools.

22.Use only accessories that are recom- mended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

DA3010F specifications

The Makita DA3010F is a powerful and versatile cordless drill that has gained popularity among both professionals and DIY enthusiasts. With its impressive design and performance, it is an essential tool for a variety of applications in woodworking, metalworking, and construction.

One of the main features of the Makita DA3010F is its robust motor. The drill is equipped with a 4-pole motor that offers exceptional power, delivering a maximum torque of around 480 in-lbs. This means it can easily handle even the toughest materials, making it suitable for a wide range of tasks. Additionally, the motor runs at two speeds, allowing users to switch between 0-400 RPM and 0-1,500 RPM, ensuring optimal performance for different applications.

Another notable characteristic of the DA3010F is its lightweight and compact design. Weighing only 3.3 lbs and measuring just 12-3/8 inches in length, the drill offers excellent maneuverability in tight spaces. This feature is especially beneficial for overhead work or when working in confined areas, as it reduces user fatigue and enhances overall comfort during extended use.

The Makita DA3010F also incorporates advanced technology in its design for superior durability and reliability. The all-metal gear construction provides enhanced longevity, while the built-in LED light illuminates the working area, making it easier to see in low-light conditions. The drill also features a handy reverse mode, allowing for easy removal of screws and fasteners.

User convenience is further enhanced with the 1/2-inch keyless chuck, which enables quick and easy bit changes without the need for additional tools. The ergonomic grip provides a comfortable hold and reduces vibration during use, ensuring improved control and precision.

Overall, the Makita DA3010F stands out with its combination of power, lightweight design, and user-friendly features. Whether you’re a professional tradesperson or a home improvement enthusiast, this drill offers the reliability and performance needed for a variety of tasks. With its advanced technologies and exceptional build quality, the DA3010F is a standout choice in the competitive market of cordless drills.