Assembly, Operation, Drilling in wood | Makita DA3010F specification

ASSEMBLY

CAUTION:

•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.

003797

003798

1. Chuck key

Installing side grip (handle)

CAUTION:

•Always be sure that the side grip is installed securely before operation.

Screw the side grip on the tool securely. The side grip can be installed on either side of the tool, whichever is convenient.

Installing or removing drill bit

To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand. Place the chuck key in each of the three holes and tighten clockwise. Be sure to tighten all three chuck holes evenly.

To remove the bit, turn the chuck key counterclockwise in just one hole, then loosen the chuck by hand.

OPERATION

Drilling operation

Drilling in wood

When drilling in wood, the best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece.

Drilling in metal

To prevent the bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled. Place the point of the bit in the indentation and start drilling.

Use a cutting lubricant when drilling metals. The exceptions are iron and brass which should be drilled dry.

CAUTION:

•Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool.

DA3010F specifications

The Makita DA3010F is a powerful and versatile cordless drill that has gained popularity among both professionals and DIY enthusiasts. With its impressive design and performance, it is an essential tool for a variety of applications in woodworking, metalworking, and construction.

One of the main features of the Makita DA3010F is its robust motor. The drill is equipped with a 4-pole motor that offers exceptional power, delivering a maximum torque of around 480 in-lbs. This means it can easily handle even the toughest materials, making it suitable for a wide range of tasks. Additionally, the motor runs at two speeds, allowing users to switch between 0-400 RPM and 0-1,500 RPM, ensuring optimal performance for different applications.

Another notable characteristic of the DA3010F is its lightweight and compact design. Weighing only 3.3 lbs and measuring just 12-3/8 inches in length, the drill offers excellent maneuverability in tight spaces. This feature is especially beneficial for overhead work or when working in confined areas, as it reduces user fatigue and enhances overall comfort during extended use.

The Makita DA3010F also incorporates advanced technology in its design for superior durability and reliability. The all-metal gear construction provides enhanced longevity, while the built-in LED light illuminates the working area, making it easier to see in low-light conditions. The drill also features a handy reverse mode, allowing for easy removal of screws and fasteners.

User convenience is further enhanced with the 1/2-inch keyless chuck, which enables quick and easy bit changes without the need for additional tools. The ergonomic grip provides a comfortable hold and reduces vibration during use, ensuring improved control and precision.

Overall, the Makita DA3010F stands out with its combination of power, lightweight design, and user-friendly features. Whether you’re a professional tradesperson or a home improvement enthusiast, this drill offers the reliability and performance needed for a variety of tasks. With its advanced technologies and exceptional build quality, the DA3010F is a standout choice in the competitive market of cordless drills.