Headband Assembly | Plantronics CS545-XD specs

Headband Assembly

The headset can be rotated for wearing on the left or right ear.

NOTE Before installing the headband, remove the eartip and earloop from the headset.

1Hold the headband so it is aligned to receive the headset as shown and insert the headset into the headband.

2Rotate the headset up.

3To optimize the position of the headset, push the headset in so the microphone is close to the corner of your mouth.

8

Image 8

Plantronics CS545-XD manual Headband Assembly

Contents

CS545-XD Contents Welcome Welcome What’s in the Box Base and Headset Basics Base overview Accessories Sold separately Customize Your Headset Change Headset ConfigurationLeft Earloop Assembly Headband Assembly Position Your Headset Charge the Headset Connect the PowerConnect Your Desk Phone Connect and Configure Your Desk Phone Desk Phone standard Check Configuration and Make a Test Call Desk Phone plus HL10 Lifter sold separately USE If You Do Not Hear a Dial Tone Additional Parts if required Desk Phone plus EHS Cable Position Your Base Talk Time Your HeadsetHeadset Controls Battery Charge your second batteryReplace your headset battery Low Battery Warning Out of Range Warning Tones Adjusting Your Headset VolumeMuting Your Headset During a Call Base Phone Button and Switches Subscription Button Your BaseAutomatic Secure Subscription Manual Over-the-Air Subscription Wideband/Narrowband Audio Switch Power On/Subscription LED Auto Answer Switch Conference Up to Three Additional Headsets Daily UsePlace an Outgoing Call Answer an Incoming Call Desk Phone TroubleshootingHeadset Need More HELP?