Craftsman 919.724123 owner manual Storage, To Replace Regulator, Gauges Quick, Regulator Manifold

Page 18

To Replace Regulator

1.Release all air pressure from air tank. See "To Drain Tank" in the Maintenance section.

2.Unplug unit.

3.Using an adjustable wrench or specified wrench remove the gauges (7/16" wrench), quick connect (13/16" wrench), and safety valve (9/16" wrench) from the regulator manifold.

Gauges

 

 

Quick

Safety Valve

Connect

Regulator

Manifold

4.Remove the hose by removing the hose clamp. NOTE: The hose clamp is not reusable. You must purchase a new hose clamp, see the Parts List Manual or purchase a standard hose clamp at a local hardware store.

5.Using an adjustable wrench or 5/8" wrench remove the regulator manifold.

Regulator

Manifold

Hose Clamp

6.Apply pipe sealant to new regulator manifold and assemble, tighten with wrench.

7.Reapply pipe sealant to gauges, quick connect, and safety valve.

8.Reassemble all components in reverse order of removal. Make sure to orient gauges to read correctly and use wrenches to tighten all components.

STORAGE

Before you store the air compressor, make sure you do the following:

1.Review the "Maintenance" section on the preceding pages and perform scheduled maintenance as necessary.

2.Set the On/Auto/Off lever to "OFF".

3.Turn the regulator counterclockwise and set the outlet pressure to zero.

4.Remove the air tool or accessory.

5.Pull ring on safety valve allowing air to bleed from the tank until tank pressure is approximately

20 psi. Release safety valve ring.

6.Drain water from air tank by opening drain valve on bottom of tank.

Water will condense in the air tank. If

not drained, water will corrode and weaken the air tank causing a risk of air tank rupture.

7.After the water has been drained, close the drain or drain valve.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be removed, cleaned, then reinstalled.

8.Protect the electrical cord and air hose from damage (such as being stepped on or run over). Wind them loosely around the compressor handle. (If so equipped)

Store the air compressor in a clean and dry location.

A14083

18- ENG

Page 17 Page 19
Image 18
Page 17 Page 19
Contents AIR Compressor Sold by Sears Canada, Inc. Toronto, Ont. M5B 2B8Table of Contents WarrantySpecification Chart Safety Guidelines DefinitionsImportant Safety Instructions Hazard What Could HappenAttachments & Accessories To alter the factory set operating pressuresHazard Result in serious burns Never operate the compressor withBelt can cause serious injury if When Transporting Compressor Glossary AccessoriesAccessories Duty CycleTools Required for Assembly AssemblyContents of Carton Installing Handles Wheels, and Molded Foot BumpersRisk of Electrical InstallationLocation of the Air Compressor Improper Grounding canExtension Cords Voltage and Circuit ProtectionOperation Know Your Air CompressorDescription of Operation Drain Valve How to StopBefore Starting Check ValveHow to Start Before Each Start-UpCustomer Responsibilities MaintenanceTo Check Safety Valve To Drain TankOutlet Tube Nut Check Valve Service and AdjustmentsTo Replace or Clean Check Valve Screwdriver Open position nothing is visibleGauges Quick StorageTo Replace Regulator Regulator ManifoldTroubleshooting Problem Cause CorrectionBeing used Problem Cause Correction Pour Placer UNE Commande DE Pièces Garantie Complète DE UN AN SUR LES Compresseurs D’AIRTableau DES Spécifications Mesures DE Sécurité DéfinitionsConsignes DE Sécurité Importantes Conserver ces directives Avertissement Risque dexplosion ou dincendie PréventionAvertissement Risque déclatement Risque PréventionAvertissement Risque de projection dobjets Avertissement Risque de choc électrique Avertissement Risque par inhalationAvertissement Risque de brûlures Avertissement Risque relié aux pièces mobilesAvertissement Risque de chute Risque Avertissement Risque dune utilisation dangereuseAccessoires AccessoiresCycle DE Service LexiqueAssemblage Contenu de la boîteOutils requis pourlassemblage Emplacement du compresseur dair Directives DE Mise À LA TerreProtection contre la surtension et protection du circuit RallongesDescription du fonctionnement UtilisationFamiliarisez-vous avec votre compresseur dair Manomètre De sortieRobinet de vidange Arrêt de lappareilAvant le démarrage Robinet de Vidange Système de refroidissement non illustréAvant chaque mise en marche Mise en marcheVérification de la soupape de sûreté EntretienResponsabilités du client Vidange du réservoirTube de sortie Écrou Remplacement ou nettoyage de la soupape de retenueEntretien ET Réglages TournevisManomètres RangementPour remplacer le régulateu Raccords rapidesDépannage Problème Cause CorrectionEst utilisé, ajustez le régulateur Moteur défectueux Remarque 51- FR A14083 MY-HOME Sears Parts and Repair CenterCanada

919.724123 specifications

The Craftsman 919.724123 is a versatile air compressor designed for various applications, from powering pneumatic tools to inflating tires. This compressor is particularly favored by both DIY enthusiasts and professionals for its reliability and performance.

One of the primary features of the Craftsman 919.724123 is its robust 3.5-gallon steel tank, which provides a substantial air storage capacity. This feature allows for longer working times between refills, making it ideal for users who need sustained air pressure without frequent interruptions. The tank is designed to resist rust and corrosion, ensuring durability and longevity even in tough environments.

The compressor operates with a powerful 1.5 horsepower motor that delivers an efficient performance. It can produce an airflow rate of approximately 2.6 CFM at 90 PSI, which makes it suitable for various tasks ranging from nailing and stapling to painting and more. This ability to maintain a steady stream of air pressure ensures that users can complete their projects without delays.

Equipped with a low-oil pump, the Craftsman 919.724123 promotes a maintenance-free experience, as it eliminates the need for regular oil changes. This feature not only enhances the overall efficiency of the compressor but also extends its life. The oil-free design contributes to easy startup and operation, even in colder temperatures, making it reliable in various conditions.

Portability is another significant advantage of the Craftsman 919.724123. It features a compact design and is lightweight, which makes it easy to transport from one job site to another. The built-in handle adds to its convenience, allowing users to carry it effortlessly.

Safety features are also integrated into the design of the compressor. It comes equipped with a safety valve that prevents pressure from exceeding safe limits, thus protecting both the unit and the user. The easy-to-read gauge allows for quick monitoring of the air pressure, ensuring optimal operation at all times.

In summary, the Craftsman 919.724123 stands out due to its combination of a durable build, efficient performance, and user-friendly features. Its powerful motor, low-maintenance oil-free operation, and portability make it an excellent choice for anyone seeking a reliable air compressor for home or professional use. Whether you are inflating tires or working on wooden projects, this air compressor is equipped to handle a variety of tasks with ease.
Top Page Image Contents