Gardena 6000S, 6000 SP manual Storage, Cleaning, Troubleshooting

Page 6

GB

5. Storage

Storage:

Clean and store the pump in a frost-free place before the first

 

frost arrives.

Disposal:

The product must not be added to normal household waste.

(in accordance with

It must be disposed of in line with local environmental regulations.

RL2002/96/EC)

 

6. Cleaning

Flushing the pump:

Cleaning the suction base and feed impeller:

￿

￿

￿

￿s

￿

￿

The GARDENA should not require regular maintenance.

After pumping pumped chlorinated swimming pool water or other liquids leaving residues, the pump should be rinsed with clear water.

WARNING ! Electric shock !

Risk of injury due to electric shock.

Disconnect the pump from the mains before cleaning the suction base and feed impeller.

1.Unscrew the cross-head screws ￿ and remove the suction base ￿ from the pump.

2.6000 SP: Press snap hooks ￿s together and remove safety cover ￿ from suction foot ￿ and clean.

3.Clean suction foot ￿ and impeller ￿.

4.Refit suction foot ￿ and screw in the cross-head screws ￿ again. During this, ensure that the sealing ring ￿ is seated correctly.

5.6000 SP: Reinsert the safety cover ￿ in the suction foot ￿ again.

For safety reasons a damaged feed impeller ￿ can only be exchanged by the GARDENA Service Centre.

7. Troubleshooting

WARNING ! Electric shock !

Risk of injury due to electric shock.

Disconnect the pump from the mains before rectifying faults.

Problem

Probable cause

Remedy

Pump is running,

Air cannot escape as

Open pressure line

but oes not deliver.

pressure line is closed.

(e.g. kinked pressure pipe).

 

 

 

 

Air locks in the suction base.

Wait for max. 60 seconds

 

 

until the pump deaerates

 

 

automatically over the vent

 

 

valve. If necessary, switch

 

 

off and start it again.

 

 

 

14

Image 6
Contents Mode d’emploi Correct use Where to use your Gardena PumpContents Liquid conveyedSafety instructions Safety InstructionsElectrical safety Operating instructionsUsing the Pump for the First Time Adjusting the Cut-in and Cut-out Height OperationAutomatic operation Manual operation Cleaning TroubleshootingStorage Technical Data Cut-in/Cut-out heightWarranty Responsabilità 6000 S Características de performance Ydelses karakteristika USA

6000 SP, 6000S specifications

The Gardena 6000 SP and 6000 S are robust, reliable water pumps designed to cater to various domestic and garden water management needs. These pumps are particularly suited for garden irrigation, withdrawing water from rain barrels, ponds, or wells, and can also be used for draining water from flooded areas. Equipped with powerful motors and advanced technologies, these models have carved out a niche for themselves in the gardening and home improvement market.

One of the standout features of the Gardena 6000 SP and 6000 S is their high-performance motors. The 6000 SP, for example, boasts a powerful 600 W motor, delivering an impressive flow rate of up to 6000 liters per hour. This power ensures rapid water transfer for any application, helping users save time while managing their water resources effectively. Moreover, the 6000 S model comes equipped with a slightly different motor configuration, designed for energy efficiency without compromising performance.

These pumps are designed with user convenience in mind. The ergonomic handle makes transportation easy, while the integrated carrying handle simplifies mobility. The built-in float switch in the 6000 S is another highlight, enabling automatic operation. This means users can set the pump to operate when water levels rise above a certain threshold, reducing manual intervention and ensuring consistent performance even when you’re not around.

Both models feature a robust, corrosion-resistant body that ensures durability and longevity. The materials used in their construction are designed to withstand outdoor elements, making them ideal for extended use in garden settings. Additionally, they include a pre-filter that prevents dirt and debris from entering the pump and causing potential damage, thus extending the service life of the unit.

For ease of maintenance and user safety, Gardena has also incorporated a thermal overload protection feature. This technology automatically switches off the pump in case of overheating, preventing damage and ensuring user safety. The built-in pressure gauge and clear water level indicator further aid in monitoring the pump’s performance, allowing users to keep track of their watering tasks efficiently.

Overall, the Gardena 6000 SP and 6000 S are excellent choices for those looking for powerful, efficient, and user-friendly water pumps. With their blend of advanced features, reliable performance, and durable construction, these models are equipped to handle a variety of water management tasks, making them indispensable tools for garden enthusiasts and homeowners alike. Whether for irrigation, draining, or transferring water, these pumps deliver on performance and functionality.