Kawasaki 840646 manual Work Area, Electrical Safety

Page 12

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood.

IMPORTANT SAFEGUARDS

People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

Lead from lead-based paints.

Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

WARNING: Handling the power cord on corded products may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

WORK AREA

Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.

Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Do not abuse the cord. Never use the cord to carry the tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords may create a fire.

A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create risk of fire.

3

4

Image 12
Contents Component #840646 Table of Contents Recognize Safety SYMBOLS, Words and LabelsCongratulations Intended USEBattery Tool USE and Care ServicePower tool is maintained Safety Rules for WorklightSymbols Symbol Name ExplanationFunctional Description Component Model NumberBattery Removing / Attaching Battery PackRemove Battery Pack Attach Battery PackCharging Battery Pack Adjusting the Worklight Beam Charge Battery PackOperating the on / OFF Switch Operating the WorklightAccessories Maintenance and CleaningSpecifications Tool Current RatingYear Limited Home USE Warranty Warranty PerformanceOther Consumer DO-IT-YOURSELF DIY Tools Limitation Of Liability Component #690084 Year Limited Warranty General Safety Rules for ALL Battery Operated ToolsElectrical Safety Work AreaPersonal Safety Specific Safety Rules AND/OR SymbolsTool USE and Care Safety Rules for Circular SAW Causes and Prevention of KickbackComponent SAW BladesControl Features DepthRIP Fence RIP Fence Lock KnobRemoving / Attaching Battery Pack Charging Battery Pack Pull battery pack free Cordless Circular SawRed LED indicator light will remain on AssemblyAdjusting Depth and Angle Attaching / Removing BladeOperating the Trigger Switch Operating the Circular SAWGeneral Cutting Pocket CuttingAmpere VoltageYear Limited Home USE Warranty Warranty Disclaimers 19.2V 2-SPEED BATTERY-OPERATED Drill Table of Contents General Safety Rules for ALL Battery Operated ToolsRecognize Safety SYMBOLS, Words and Labels CongratulationsElectrical Safety Work AreaPersonal Safety ServiceTool USE and Care Specific Safety Rules AND/OR Symbols Safety Rules for Cordless Drill / DriversSymbols Symbol Name ExplanationFunctional Description Battery AccessoriesComponent Model Number REMOVING/ATTACHING Battery Pack Charger Charging Battery PackAssembly This Tool is Controlled By a Trigger Switch Built in LED LampForward / Reverse and Trigger Lock Lever Operating the DrillTorque Settings ScrewdrivingDrilling Metal Drilling Masonry High / LOW Speed Gear ShiftingMaintenance and Cleaning AccessoriesScrewdriving Conductor Size in A.W.GSpecifications Year Limited Home USE WarrantyProtecting the Environment Other Consumer DO-IT-YOURSELF DIY ToolsExclusions