Kawasaki 840646 manual Work Area, Electrical Safety

Page 25

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood.

IMPORTANT SAFEGUARDS

People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

Lead from lead-based paints.

Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

WARNING: Handling the power cord on corded products may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

WORK AREA

Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.

Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Do not abuse the cord. Never use the cord to carry the tool, pulling or unplug- ging the power tool. Keep the cord away from heat, oil, sharp edges, or mov- ing parts. Replace damaged cords immediately. Damaged cords may create

a fire.

Damaged or entangled cords increase the risk of electric shock.

A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create risk of fire.

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

4

Image 25
Contents Component #840646 Recognize Safety SYMBOLS, Words and Labels Table of ContentsCongratulations Intended USEService Battery Tool USE and CarePower tool is maintained Safety Rules for WorklightSymbol Name Explanation SymbolsFunctional Description Component Model NumberRemoving / Attaching Battery Pack BatteryRemove Battery Pack Attach Battery PackCharge Battery Pack Charging Battery Pack Adjusting the Worklight BeamOperating the on / OFF Switch Operating the WorklightMaintenance and Cleaning AccessoriesSpecifications Tool Current RatingWarranty Performance Year Limited Home USE WarrantyOther Consumer DO-IT-YOURSELF DIY Tools Limitation Of Liability Component #690084 General Safety Rules for ALL Battery Operated Tools Year Limited WarrantyWork Area Electrical SafetySpecific Safety Rules AND/OR Symbols Personal SafetyTool USE and Care Causes and Prevention of Kickback Safety Rules for Circular SAWSAW Blades ComponentDepth Control FeaturesRIP Fence RIP Fence Lock KnobPull battery pack free Cordless Circular Saw Removing / Attaching Battery Pack Charging Battery PackRed LED indicator light will remain on AssemblyAttaching / Removing Blade Adjusting Depth and AngleOperating the Circular SAW Operating the Trigger SwitchGeneral Cutting Pocket CuttingVoltage AmpereYear Limited Home USE Warranty Warranty Disclaimers 19.2V 2-SPEED BATTERY-OPERATED Drill General Safety Rules for ALL Battery Operated Tools Table of ContentsRecognize Safety SYMBOLS, Words and Labels CongratulationsWork Area Electrical SafetyService Personal SafetyTool USE and Care Safety Rules for Cordless Drill / Drivers Specific Safety Rules AND/OR SymbolsSymbols Symbol Name ExplanationAccessories Functional Description BatteryComponent Model Number Charger Charging Battery Pack REMOVING/ATTACHING Battery PackAssembly Built in LED Lamp This Tool is Controlled By a Trigger SwitchForward / Reverse and Trigger Lock Lever Operating the DrillScrewdriving Torque SettingsDrilling Metal Drilling Masonry High / LOW Speed Gear ShiftingAccessories Maintenance and CleaningScrewdriving Conductor Size in A.W.GYear Limited Home USE Warranty SpecificationsProtecting the Environment Other Consumer DO-IT-YOURSELF DIY ToolsExclusions