Accessories, Tool Current Rating, Specifications

1.Remove the battery pack from the Worklight.

2.Hold the top of the Worklight with one hand while twisting the rim in a counter-clockwise direction with the other. Continue turning until the rim comes loose.

3.Remove the bulb by turning it slightly and pulling it out of the bulb fitting. Be careful not to damage the delicate parts inside the case.

4.Insert the new bulb, then carefully put the rim back in place and turn it clockwise to tighten it.

REPLACEMENT BULB

ACCESSORIES

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry the amount of current necessary for your power tool. If not, your tool may experience a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord (see table below).

RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS

TOOL CURRENT RATING		CONDUCTOR SIZE IN A.W.G
AMPERE	10FT.	25FT.	50FT.	100FT.
3-6	18	18	18	18
6-8	18	18	18	16
8-10	18	18	18	14

MAINTENANCE AND CLEANING

Always remove the battery pack before attempting cleaning or maintenance.

Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear.

Always clean the battery pack using only a dry cloth. Do not use liquids.

Always unplug the charger before cleaning it.

Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth.

Never open the Worklight case, battery pack or charger. Do not attempt to repair the Worklight, battery pack or charger yourself. Opening any of these parts will void your warranty.

Use only authorized replacement parts for your tool.

Equipment service must be performed only by qualified repair personnel using authorized replacement parts. Service or maintenance by unqualified personnel could result in considerable risk of personal injury. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.

10-12	16	16	14	14
12-16	14	12	12	-
16-20	12	12	12	-

SPECIFICATIONS

SPECIFICATIONS
Voltage	19.2V
Voltage	19.2V
Light Bulb Type	Krypton 19.2V 0.6 A
Charger Input	120V	60Hz
Charging Time	Approx. 3 Hours
Battery Type	Ni-Cad

PROTECTING THE ENVIRONMENT

BATTERIES

Alltrade batteries can be recharged many times. At the end of their useful life, recy- cle batteries with due care for our environment.

Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.

840056 specifications

The Kawasaki 840056 is an advanced model that showcases the company's commitment to innovation and performance in the machinery sector. This machine is engineered with a focus on versatility and efficiency, making it ideal for a wide range of applications, from construction to agricultural tasks.

One of the standout features of the Kawasaki 840056 is its powerful engine. The machine is equipped with a cutting-edge, high-performance engine that delivers impressive horsepower while maintaining fuel efficiency. This balance ensures that operators can complete jobs quickly without excessive fuel consumption, minimizing operating costs.

The design of the Kawasaki 840056 emphasizes user comfort and convenience. The cab is spacious, outfitted with ergonomic controls, high visibility, and an intuitive dashboard that provides critical information at a glance. Operators benefit from adjustable seating and climate control options, ensuring that long hours of operation can be undertaken with maximum comfort.

In terms of technology, the Kawasaki 840056 incorporates advanced systems that enhance its operational capabilities. The machine features a state-of-the-art hydraulic system, providing exceptional lifting power and precision. This system is complemented by an innovative load sensing mechanism, which ensures that hydraulic power is used efficiently, adapting automatically to the demands of the task at hand.

Safety is a top priority in the design of the Kawasaki 840056. The machine comes equipped with multiple safety features, including stability monitoring systems, anti-rollover technologies, and implement safety locks. These enhancements not only protect the operator but also ensure the safety of those working nearby.

Additionally, the Kawasaki 840056 is designed for easy maintenance. Access to critical components is simplified, allowing technicians to perform routine checks and repairs quickly. This user-friendly design can significantly reduce downtime, keeping productivity levels high.

Durability is another hallmark of the Kawasaki 840056. Constructed with high-quality materials and engineered to withstand tough working conditions, this machine is built to last. Whether faced with extreme weather or heavy workloads, the Kawasaki 840056 is up to the challenge, making it a reliable choice for professionals in various industries.

In conclusion, the Kawasaki 840056 represents a blend of power, efficiency, and user-friendly features, making it a compelling option for anyone in need of reliable and versatile machinery. With its advanced technologies and focus on safety and comfort, it stands out as a leader in its class.