Kawasaki 840056 Remove Battery Pack, Not use the Cordless Drill if the battery

Page 42

REMOVING / ATTACHING BATTERY PACK

CHARGING BATTERY PACK

REMOVE BATTERY PACK:

1. Press both release buttons on either side of the Cordless Drill to release the battery pack.

 

2. Pull battery pack free of Cordless Drill.

 

ATTACH BATTERY PACK:

 

1. Align the raised portion of the battery pack

 

with the groove in the battery compartment

RELEASE

of the Cordless Drill.

BUTTON

2. Press the battery pack into place. Make

 

 

sure the latches are securely fastened. Do

 

not use the Cordless Drill if the battery

 

pack is not seated properly.

CHARGE BATTERY PACK:

1.Make sure the trigger on the Cordless Drill

is in the “OFF” position and remove the battery pack from the Cordless Drill.

2. Plug 120V AC Adapter into household outlet and into side of battery charger. Insert battery pack into battery charger. When the battery is placed in the charger, the

red LED indicator light will remain on.

BATTERY PACK

120V AC

ADAPTER

LED LIGHT

BATTERY

CHARGER

CHARGER

Before using battery charger, please read carefully all instructions and cautionary markings on battery charger, battery pack and product using battery.

The charger will not automatically turn “OFF” when the battery pack is fully charged. The charging indicator light will remain “ON” until the charger is disconnected from the electrical outlet.

Use only the charger which accompanied your product or direct replacement as listed in this manual. Do not substitute any other charger. Use only Alltrade approved chargers with your product.

Do not disassemble charger.

Do not use charger if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid.

The battery pack and charger heat during charging. Place the charger on a flat, non-flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack.

When the battery pack requires recharging, a 3-5 hour charge allows the tool to operate at full power. A charging indicator light on the charger will illuminate to show that charging is taking place.

3.When fully charged, reattach battery pack onto Cordless Drill, making certain latches fasten securely. Cordless Drill will not operate properly if the battery pack is not seated properly.

ASSEMBLY

Be aware that this tool is always in an operating condition because it does not have to be plugged into an electrical outlet. Always turn the switch “OFF” and remove the battery pack before changing bits.

INSTALLING DRILL BIT INTO KEYLESS CHUCK

WARNING

Before inserting a drill bit or other accessory, make sure the forward/reverse and trigger lock lever is in the center “OFF” position to prevent accidental starts that may result in injury.

Do not attempt to tighten drill bits (or any other accessory) by gripping the front of the chuck and turning the tool on. This may cause personal injury and/or damage to the chuck.

When removing the bit from the tool, avoid contact with skin and use proper protective gloves when grasping the bit or accessory. Accessories may be hot after prolonged use.

11

12

Page 41 Page 43
Image 42
Page 41 Page 43
Contents 19.2V BATTERY-OPERATED Circular SAW Recognize Safety SYMBOLS, Words and Labels Table of ContentsGeneral Safety Rules for ALL Battery Operated Tools CongratulationsSave These Instructions for Future Reference Important SafeguardsElectrical Safety Work AreaSpecific Safety Rules AND/OR Symbols Personal SafetyService Tool USE and CareSafety Rules for Circular SAW Causes and Prevention of KickbackControls Accessories Components SymbolsSymbol Name Explanation Functional DescriptionBattery Charge Battery Pack Removing / Attaching Battery Pack Charging Battery PackAttach Battery Pack AssemblyAdjusting Depth and Angle Attaching / Removing BladeGeneral Cutting Operating the Trigger SwitchOperating the Circular SAW Pocket CuttingSpecifications Maintenance and CleaningAccessories Tool Current RatingYear Limited Home USE Warranty Which Extend Beyond the Description on the Face HereofWarranty Disclaimers 19.2V BATTERY-OPERATED Reciprocating SAW Attaching / Removing Blade Operating the Reciprocating SAW Important Safeguards Safety Rules for Cordless Reciprocating SAW Symbols Controls and Components Removing / Attaching Battery Pack Reciprocating SawTo Attach Blade Variable Speed Trigger SwitchThis Tool is Controlled By a Trigger Switch To Remove BladePut on eye protection Plunge CuttingMetal Cutting Voltage 19.2V Length of Stroke 22mm 7/8 Switch Battery Type Ni-CadCharger Input 120V 60Hz Charging Time Approx -5 hours Year Limited Home USE Warranty Warranty Disclaimers 87-1904-60957 Congratulations Table of ContentsRecognize Safety SYMBOLS, Words and Labels Intended USEBattery Tool USE and Care ServiceSafety Rules for Worklight Functional Description SymbolsSymbol Name Explanation Component Model NumberBattery Removing / Attaching Battery PackCharger Operating the Worklight Charging Battery Pack Adjusting the Worklight BeamOperating the on / OFF Switch Replacing the Light BulbSpecifications AccessoriesMaintenance and Cleaning Tool Current RatingYear Limited Home USE Warranty Warranty PerformanceOther Consumer DO-IT-YOURSELF DIY Tools Limitation Of Liability 19.2V 2-SPEED BATTERY-OPERATED Drill Table of Contents Important Safeguards Safety Rules for Cordless Drill / Drivers Symbols Battery Pack High/Low Speed Switch Control Ring690076 Installing Drill BIT Into Keyless Chuck Remove Battery PackNot use the Cordless Drill if the battery Cordless DrillTo Select the Directions Rotation Torque SettingsFORWARD/REVERSE and Trigger Lock Lever Operating the DrillDrilling Metal High / LOW Speed Gear ShiftingScrewdriving Drilling MasonryConductor Size in A.W.G Voltage 19.2V Low SpeedYear Limited Home USE Warranty Warranty Disclaimers Imprimé dans la Chine Impreso en China Congratulations Symbols Year Limited Home USE Warranty Warranty Disclaimers

840056 specifications

The Kawasaki 840056 is an advanced model that showcases the company's commitment to innovation and performance in the machinery sector. This machine is engineered with a focus on versatility and efficiency, making it ideal for a wide range of applications, from construction to agricultural tasks.

One of the standout features of the Kawasaki 840056 is its powerful engine. The machine is equipped with a cutting-edge, high-performance engine that delivers impressive horsepower while maintaining fuel efficiency. This balance ensures that operators can complete jobs quickly without excessive fuel consumption, minimizing operating costs.

The design of the Kawasaki 840056 emphasizes user comfort and convenience. The cab is spacious, outfitted with ergonomic controls, high visibility, and an intuitive dashboard that provides critical information at a glance. Operators benefit from adjustable seating and climate control options, ensuring that long hours of operation can be undertaken with maximum comfort.

In terms of technology, the Kawasaki 840056 incorporates advanced systems that enhance its operational capabilities. The machine features a state-of-the-art hydraulic system, providing exceptional lifting power and precision. This system is complemented by an innovative load sensing mechanism, which ensures that hydraulic power is used efficiently, adapting automatically to the demands of the task at hand.

Safety is a top priority in the design of the Kawasaki 840056. The machine comes equipped with multiple safety features, including stability monitoring systems, anti-rollover technologies, and implement safety locks. These enhancements not only protect the operator but also ensure the safety of those working nearby.

Additionally, the Kawasaki 840056 is designed for easy maintenance. Access to critical components is simplified, allowing technicians to perform routine checks and repairs quickly. This user-friendly design can significantly reduce downtime, keeping productivity levels high.

Durability is another hallmark of the Kawasaki 840056. Constructed with high-quality materials and engineered to withstand tough working conditions, this machine is built to last. Whether faced with extreme weather or heavy workloads, the Kawasaki 840056 is up to the challenge, making it a reliable choice for professionals in various industries.

In conclusion, the Kawasaki 840056 represents a blend of power, efficiency, and user-friendly features, making it a compelling option for anyone in need of reliable and versatile machinery. With its advanced technologies and focus on safety and comfort, it stands out as a leader in its class.
Top Page Image Contents