Assembly Variable Speed Trigger Switch

ASSEMBLY

VARIABLE SPEED TRIGGER SWITCH

Be aware that this tool is always in an operating condition because it does not have to be plugged into an electrical outlet. Always turn the switch “OFF” and remove the battery pack before changing bits.

INSTALLING DRILL BIT INTO KEYLESS CHUCK

WARNING

Before inserting a drill bit or other accessory, make sure the forward/reverse and trigger lock lever is in the center “OFF” position to prevent accidental starts that may result in injury.

THIS TOOL IS CONTROLLED

BY A TRIGGER SWITCH:

•The speed of the Cordless Drill depends on the amount of pressure you put on the trigger.

•The more pressure you apply, the faster the Cordless Drill will go.

•Release the pressure and the Cordless Drill will slow down.

TRIGGER SWITCH

LED LIGHT

Do not attempt to tighten drill bits (or any other accessory) by gripping the front of the chuck and turning the tool on. This may cause personal injury and/or damage to the chuck.

When removing the bit from the tool, avoid contact with skin and use proper protective gloves when grasping the bit or accessory. Accessories may be hot after prolonged use.

BUILT IN LED LAMP

•Press the trigger switch to light up the lamp. The lamp remains on while the trigger switch is being pressed. The lamp goes out after releasing the trigger.

NOTE: Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination.

Do not look into light or see the source of light directly.

1.Hold the rear end of the chuck in one hand and use the other hand to rotate the front end in a counter- clockwise direction to open the jaws of the chuck.

2.Insert the shank of the bit (or other accessory) fully into the keyless chuck, taking care to keep the bit in the center of the jaws of the chuck.

HOLD HERE

RELEASE

GRIP

HOLD HERE

FORWARD / REVERSE AND TRIGGER LOCK LEVER

Be sure the trigger is released when changing the position of the lever. Always store the tool in the “LOCKED/OFF” position.

Always check the direction of the Cordless Drill's rotation before use.

TO SELECT THE DIRECTIONS

3.Turn the front end of the chuck clockwise to hold the bit in place.

4.Tighten securely by turning the front end of the chuck clockwise while holding the rear end.

OPERATING THE DRILL

Never tape the trigger switch down to provide continu- ous high speed. The tool may fail under such conditions causing fire or personal injury.

OF ROTATION:

•To select forward Cordless Drill rotation, press the trigger lock from left to right flat against the Cordless Drill body.

•To select reverse, press the trigger lock lever in the opposite direction.

•The center position locks the tool.

	FORWARD
	LOCK
TRIGGER	REVERSE
LOCK

840097 specifications

The Kawasaki 840097 is a notable entry in Kawasaki's esteemed lineup of outdoor power equipment, designed primarily for efficiency and durability. This model is especially recognized for its robust construction, making it ideal for both residential and commercial landscaping tasks.

One of the standout features of the Kawasaki 840097 is its powerful engine. Equipped with a high-performance engine, it provides a reliable source of power, ensuring that users can tackle even the toughest jobs with ease. The engine is designed to optimize fuel efficiency while delivering consistent performance, which is a crucial factor for users who require extended operational periods without frequent refueling.

The Kawasaki 840097 also incorporates advanced technology to simplify operation and enhance user experience. Its ergonomic design includes comfortable grips and controls that are intuitively placed, allowing for easy handling. This attention to user-centric design minimizes fatigue during extended use, making it a preferred choice for professionals and enthusiasts alike.

Another major characteristic of the Kawasaki 840097 is its versatility. The model supports a wide range of attachments, which means it can be customized for various applications. Whether users need to mow grass, trim hedges, or blow leaves, this model can adapt to meet those needs, making it a multi-functional tool for any landscape maintenance job.

Maintenance is straightforward thanks to the design of the Kawasaki 840097. Easy access to essential components reduces downtime and empowers users to perform routine maintenance tasks quickly. The manufacturer's focus on longevity means that users can expect a long service life from this equipment with proper care.

Durability is another hallmark of the Kawasaki 840097. Constructed with high-quality materials, this model can withstand the rigors of regular use without compromising performance. The robust build ensures that it can handle demanding environments, making it suitable for both commercial landscaping and intensive home use.

In summary, the Kawasaki 840097 is a versatile, powerful, and durable piece of equipment that caters to the needs of landscapers and homeowners alike. With its efficient engine, user-friendly design, and focus on maintenance, it stands out as an exceptional choice for anyone looking to invest in reliable outdoor power equipment. Whether being used for small residential projects or large-scale commercial tasks, this model is designed to deliver excellent performance and lasting satisfaction.