Studer Innotec HPC 2800-12, HPC 4400-24, HPC 600-48, HPC 6000-48 Mounting and installing, Fixing

Page 8

STUDER INNOTEC

HP-COMPACT

3 Mounting and installing

3.1Installation place

The location of the HP-COMPACT must be driven by the following criteria:

−Protection from unauthorized handling

−Dry dust free room, no condensation

−Never install directly over the battery and never in a cabinet together with the batteries

−Keep ventilation holes free

−In mobile installations it is important to keep the vibrations down as low as possible

3.2Fixing

Basically the HP-COMPACT can be installed in any desired location but only vertically. First of all the plate supplied along with the HP-COMPACT must be screwed firmly (due to the weight of the device) on the wall. Then the HP-COMPACT is hooked on the plate and screwed underneath.

Cautious: the fixing must be fully made otherwise the HP-COMPACT may fall and cause important damages.

In motor vehicles HP-COMPACT must be fixed on vibrations reducing elements. The HP-COMPACT must not be fixed on a combustible base, as the back of the casing can get hot and reach up to 60 degrees Celsius.

3.3Connections

3.3.1 General instructions on connecting

−The cable connection on the terminals AC INPUT and AC OUTPUT must be carried out with a screwdriver Nr.3 and the connection of the AUX RELAY terminal with a screwdriver Nr.2.

−The conductor cross section on the terminals AC INPUT / AC OUTPUT / must comply with the local rules.

−All connecting cables and also the battery cables must be fixed with strain relief clamps.

−The fuses supplied with the HPC 4400-24, 6000-48 and 8000-48 have to be installed (see description in 3.4). The cable cross section for the HP 2800-12, 4400-24, 6000-48 and 8000-48 is resp. 95, 70, 50 and 70 mm2 and their length must be as short as possible (max. 2m).

−The fuse supplied with the product (save for HPC 2800-12) does not protect the battery cables.

−To protect the battery cables, a fuse corresponding to the conductor cross section must be fixed directly on to the battery.

−All cables must be tightly screwed in place. For safety, a yearly control is recommended. In mobile installations controls must be carried out more often.

−Connecting must be done by qualified people. Material such as cable, connectors and distribution boxes, fuses etc. used in the installation must comply with the respective valid low-voltage installation rules and regulations in force.

3.3.2 Protection cover of the terminals connections

The protection cover must to be closed after any service on the appliance.

3.4Connection Plan

HP-COMPACT V5.4

10/80

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Sine wave Inverter, Battery charger, Transfersystem HP-COMPACT HPCHP-COMPACT Quality and Warranty Warranty DisclaimerGeneral Information Operating instructionsSpecial precautions Liability DisclaimerPrinciple schematic IntroductionDescription of the main functions Battery connecting Mounting and installing Installation placeFixing ConnectionsPre-installation settings CablingConnection to battery 3.6.1.1 On the appliance side Connection to Remote control Connection to Temperature Sensor TempConnection to the 230Vac-consumer appliances AC Output Connection to the 230Vac Input AC InputControl Display and control parametersLight Emitting Diodes LED LEDPush buttons Turning KnobsInverter Charge detection system „StandbyBattery Condition Overheating Over TempBattery charger Default values for battery voltage thresholdsCycle of charge Equalization chargingCharging current Input current repartition Power sharingSet the Input Limit Transfer system Fast UPS- Mode for the Transfer Switch Delayed mode of the Transfer SystemMultifunctional Contact Set the transfer voltage thresholdRemote Control RCC-01 HP-COMPACTProgramming Remote control for „Power Sharing RPS-01Standard setting Set the voltage and timing threshold Reset value default settingsBattery voltages and absorption time Auxiliary contact Table of voltage and timing thresholdPrinciple Programming of the Auxiliary ContactPower cut of the second priority loads Manual operating of Auxiliary ContactInstallation Maintenance Diagram of the different modesDisabling some of the HP-COMPACT functions Declaration of CE ComplianceTechnical Data

HPC 2800-12, HPC 4400-24, HPC 600-48, HPC 6000-48 specifications

Studer Innotec is a Swiss company renowned for its innovative and high-quality inverter chargers. Among their notable products are the HPC series inverters: HPC 2800-12, HPC 4400-24, HPC 600-48, and HPC 6000-48. These models are designed for a wide range of applications, from residential use to commercial and industrial environments, delivering reliable power solutions.

The HPC 2800-12 is a robust inverter charger designed for 12V systems. It has a continuous power output of 2800W, making it suitable for various off-grid applications. Its advanced technology allows for a pure sine wave output, ensuring compatibility with sensitive electronic devices. A standout feature is its intelligent battery management system that optimizes charging processes to prolong battery life and enhance efficiency.

Moving up to the HPC 4400-24, this model operates at 24V and boasts a powerful output of 4400W. This inverter charger is ideal for larger systems that require substantial power. It features a high surge capacity, allowing it to handle heavy loads and start demanding appliances effortlessly. The digital display provides users with vital information on system performance, making it easier to monitor and manage energy consumption.

The HPC 600-48 is a compact yet powerful 48V inverter charger delivering a continuous output of 600W. It combines versatility with performance, making it suitable for smaller applications and mobile setups. Like its siblings, the HPC 600-48 also features pure sine wave technology and advanced protections against overload, short circuit, and overheating, ensuring safe operation under various conditions.

For high-demand applications, the HPC 6000-48 stands out with an impressive output of 6000W. Designed for larger setups, this model is capable of powering multiple appliances simultaneously. It incorporates advanced network technology, allowing parallel operation for increased power capacity when connecting multiple units. Moreover, its modular design enables easy customization to meet specific power requirements.

All models within the Studer Innotec HPC series boast key technologies such as programmable charging profiles, advanced monitoring capabilities, and a built-in protection system. Their robust construction ensures durability and reliability, making them suitable for various environments. With a commitment to quality and performance, the Studer Innotec HPC series continues to be a preferred choice for users seeking dependable power solutions in both commercial and residential settings.
Top Page Image Contents