Tekkeon MP3700 manual To Charge through the DC in Port

To Charge through the DC IN Port

1.Connect the solar panel output cable into the DC IN port on myPower ALL Plus.

2.Verify that the red charging indicator turns on to indicate the battery is charging and is less than 80% charged.

3.When the charging indicator turns to green, press the Capacity Display button to view the battery capacity. If the capacity does not indicate full (all green LEDs on), continue to charge the battery until the battery capacity indicates full.

4.When the battery capacity indicates full, unplug the connected charging cable.

To Charge through the 3-Pin Input Port

1.Connect the 3-Pin end of the optional Smart 3-Pin Adapter into the 3-Pin Input port on the MP3700 (shown) and the other end into the solar panel output port.

2.Verify that the charging indicator next to the input jack on the Smart 3-Pin Adapter (shown) will turn on to indicate the battery is charging.

3.After approximately four hours, press the Capacity Display button to view the battery capacity. If the capacity does not indicate full (all green LEDs on), continue to charge the battery until the battery capacity indicates full.

4.When the battery capacity indicates full, unplug the connected charging cable.

LED turns on when solar panel is

charging myPower ALL Plus

6