Connect the 5V Device Using an Adapter
1.Connect the compatible output adapter tip to the retractable USB cable.
2.Connect the retractable USB cable into the USB port on myPower ALL Plus.
3.Connect the adapter tip to your 5V device.
4.Slide the power switch to ON to turn on the battery. While connected, myPower ALL Plus will power and charge your device.
5.Slide the power switch to OFF to turn off the battery when not in use.
Connect the 5V Device Using the Device USB Cable
1.Insert the USB plug on the device cable into the USB port on myPower ALL Plus.
2.Connect the USB cable into the power jack on your portable device.
3.Slide the power switch to ON to turn on the battery.
4.Turn on the portable device and use it as you would normally. While connected, myPower ALL Plus will power and/or charge your device.
5.When finished, unplug the USB cable from myPower ALL Plus and your device, and slide the power switch to OFF to turn off the battery when not in use.
NOTE: The USB port provides only 5V 1A of power and cannot be used to charge devices that require greater voltage or higher than 1A current.
USER GUIDE | 9 |