Configuration

200712159 93-2768 RV Series Inverter-Charger Owner’s Manual_Eng.qxd 2/29/2008 1:55 PM Page 5

Operation (continued)

Resetting Your Inverter/Charger to Restore AC Power

Your Inverter/Charger may cease supplying AC power or DC charging power in order to protect itself from overload or to protect your elec- trical system. To restore normal functioning:

Overload Reset: Switch operating mode switch to “OFF” and remove some of the connected electrical load (ie: turn off some of the AC devices drawing power which may have caused the overload of the unit). Wait one minute, then switch operating mode switch back to either “AUTO/REMOTE” or “CHARGE ONLY.”

Set Configuration DIP Switches

Using a small tool, set the Configuration DIP Switches (located on the front panel, see diagram) to optimize Inverter/Charger operation depending on your application. Refer to the appropriate section to review the instructions for your specific model.

Group B Dip Switches (Not on 612 Models)

INPUT C/B

A4	A3	A2	A1
	OUTPUT C/B 12A

Group A Dip Switches (All Models)

Group A DIP Switches (All Models)

Using a small tool, configure your Inverter/Charger by setting the four Group A DIP Switches (located on the front panel of your unit; see diagram) as follows:

Select Battery Type—REQUIRED

(All models)

CAUTION: The Battery Type DIP Switch setting must

match the type of batteries you connect, or your batteries

may be degraded or damaged over an extended period of

time. See “Battery Selection,” p. 7 for more information.

Battery Type

Switch Position

Gel Cell (Sealed) Battery

Wet Cell (Vented) Battery

Down (factory setting)

A2	Select ChargerEnable/Inhibit
A2	Select ChargerEnable/Inhibit	A4	A3	A2	A1	INHIBIT
	(750 and 1250 models only)	A4	A3	A2	A1	INHIBIT
	(750 and 1250 models only)
	Switch is preset to ENABLE, which
	permits continuous battery charging.
	permits continuous battery charging.					ENABLE
	If you are connecting your unit to					ENABLE


	batteries with a separate charger, you may set this switch to
	INHIBIT to disable its built-in charger to prevent overcharging

Battery Type	Switch Position
Inhibit	Up
Enable	Down (factory setting)

A4 A3 Select Low AC Input Voltage Point for Switching to Battery—

OPTIONAL*

	Switch
Voltage	Position
105V	#A4 Up & #A3 Up
95V	#A4 Up & #A3 Down
85V	#A4 Down & #A3 Up
75V	#A4 Down & #A3 Down
	(factory setting)

*Most of your connected appliances and equipment will perform adequately when your Inverter/Charger's Low AC Voltage Input Point (DIP Switch #3 and #4 of Group A) are set to 95V. However, if the unit frequently switches to battery power due to momentary low line voltage swings that would have little effect on equipment operation, you may wish to adjust this setting. By decreasing the Low AC Voltage Input Point, you will reduce the number of times that your unit switches to battery due to voltage swings.

A4 A3 A2 A1

200712159 93-2768 RV specifications

The Tripp Lite 200712159 93-2768 RV is a versatile and reliable power solution, designed for both recreational vehicles and various portable applications. Known for its robust performance and sturdy construction, this device offers a multitude of features that make it an essential component for adventurers and outdoor enthusiasts.

One of the standout features of the Tripp Lite 200712159 is its exceptional output capacity. With the ability to handle significant load requirements, it ensures that all your essential devices can be powered simultaneously without compromising performance. This capability is particularly beneficial for RV users who rely on multiple devices, such as refrigerators, laptops, and entertainment systems, while on the road.

The device also boasts advanced surge protection technology, safeguarding connected equipment from transient voltage spikes, which can occur due to lightning strikes or power surges. This feature provides peace of mind, particularly when traveling through areas with unstable power sources. In addition, the unit is designed with rugged durability in mind, featuring a weather-resistant casing that protects it from the elements. This characteristic makes it perfect for outdoor use, where exposure to moisture and changing temperatures can be a concern.

The Tripp Lite 200712159 is also incredibly user-friendly. It includes an intuitive interface with LED indicators, allowing users to easily monitor power status and load capacity. This interface helps ensure users can operate the device efficiently, reducing the risk of overload situations. Furthermore, the compact design of the unit makes it easy to transport and store, which is a vital consideration for RV travelers who often have limited space.

A notable characteristic of this power solution is its compatibility with a wide range of devices. From laptops and smartphones to larger appliances, the Tripp Lite 200712159 can accommodate various power needs, making it an ideal choice for camping trips, tailgating events, and more.

In conclusion, the Tripp Lite 200712159 93-2768 RV stands out as a highly functional power supply that combines robustness, safety features, and user-centric design. Its impressive versatility and ability to handle substantial demands make it a must-have for anyone looking to enhance their outdoor experiences or streamline their RV adventures. With this power solution at your disposal, you can confidently enjoy all your electronic devices, no matter where the road takes you.