Tripp Lite 200712159 93-2768 RV owner manual Feature Identification, 12 †

Page 3

200712159 93-2768 RV Series Inverter-Charger Owner’s Manual_Eng.qxd 2/29/2008 1:55 PM Page 3

Feature Identification

Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.

1 Configuration DIP Switches: optimize Inverter/Charger operation depending on your application. See Configuration section for setting instructions.

2Operating Mode Switch: controls Inverter/Charger operation. The "AUTO/REMOTE" setting ensures your equipment receives constant, uninterrupted AC power. It also enables the Inverter/Charger to be remotely monitored and controlled with an optional remote module (Trip Lite model APSRM4, sold sep- arately). The "CHARGE ONLY" setting allows your batteries to return to full charge faster by turning the inverter off which halts battery discharging. The "DC OFF" setting de-energizes the unit and connects AC OUT to AC IN. See Operation section for set- ting instructions.

3"LINE", "INVERT", "LOAD" LEDs: show whether the Inverter/Charger is operating from AC line power or DC battery power. It also warns you if the connected equipment load is too high. See Operation section for instructions on reading the indi- cator lights.

4"BATT VOLTAGE" LEDs: these three lights will turn ON in several sequences to show approximate battery level. See Operation section for instructions on reading the indicator lights.

5DC Power Terminals: connect to your battery terminals. See Battery Connection section for instructions.

6Ground Fault Interrupter (GFI) AC Receptacles (not on hardwire models): allow you to connect equipment that would normally be plugged into a utility outlet. They feature ground fault interrupter switches that trip if there is excessive current on the ground safety wire.

7AC Input Cord (not on hardwire models): connects the Inverter/Charger to any source of utility- or generator-supplied AC power. SeeAC Input/Output Connection section for instructions.

8 Hardwire AC Input/Output Terminals (not on corded models): securely connect the Inverter/Charger to vehicle or facility electrical system input and recommended GFCI receptacle output. See AC Input/Output Connection section for instructions.

9 Resettable Circuit Breakers: protect your Inverter/Charger against damage due to overload or charger failure. See Operation section for resetting instructions.

10Remote Control Module Connector: allows remote monitoring and control with an optional module (Tripp Lite model APSRM4, sold separately or included with select models). See remote module owner’s manual for connection instructions.

11Battery Charge Conserver (Load Sense) Dial: conserves bat- tery power by setting the low-load level at which the Inverter/Charger’s inverter automatically shuts off. See Configuration section for setting instructions.

12Main Ground Lug: properly grounds the Inverter/Charger to vehicle grounding system or to earth ground. See Configuration section for instructions.

13Multi-Speed Cooling Fan: quiet, efficient fan prolongs equipment service life.

14Hardwire AC Input/Output Cover Plate

15Battery Temperature Sensing Connector: prolongs battery life by adjusting charge based on battery temperature. Use with cable (included on select models). See Configuration section for details.

16Automatic Generator Start Connector: automatically cycles gen- erator based on battery voltage (included on select models). Use with user-supplied cable. See Configuration section for details.

17Ignition Interlock Control Jack (select models only): used to con- nect the inverter/charger to the vehicle ignition switch. Disables AC power outlet when the vehicle ignition switch is placed in the “Engine Run” position. See p. 8 for connection instructions.

13

1

4

10

3

2

11

13

1

4

10

3

2

11

 

15

 

Side Mounted,

15

Not Shown

 

Side Mounted,

16

Not Shown

 

Side Mounted,

16

 

Not Shown

“FOR USE WITH COPPER WIRE ONLY”

Side Mounted,

HOT IN

 

Not Shown

NEUTRAL

IN

9

GROUND

IN

 

 

 

GROUND

OUT

6

HOT OUT

 

 

NEUTRAL

OUT

5

7

12†

12

5

8

9

14

Front View (Corded Models)

† Select models includes front-mounted ground lug.

Front View (Single Input/Output Hardwire Models)

 

17

Rear View

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents DC-to-AC Inverter/Chargers ContentsEquipment Connection Warnings Important Safety InstructionsBattery Connection Warnings Location Warnings12 † Feature IdentificationSwitch Modes Indicator LightsOperation Group a DIP Switches All Models ConfigurationResetting Your Inverter/Charger to Restore AC Power Set Configuration DIP SwitchesSelect Load Sharing-OPTIONAL Group B DIP SwitchesAppliances Battery SelectionSelect Auxiliary Battery Type if any ToolsVehicular and Non-Vehicular Horizontal Mount MountingBattery Connection Max Distance from Battery to Unit in FeetVehicular Single Input/Output Models ServiceMaintenance AC Input/Output ConnectionLimited Warranty Troubleshooting200712159

200712159 93-2768 RV specifications

The Tripp Lite 200712159 93-2768 RV is a versatile and reliable power solution, designed for both recreational vehicles and various portable applications. Known for its robust performance and sturdy construction, this device offers a multitude of features that make it an essential component for adventurers and outdoor enthusiasts.

One of the standout features of the Tripp Lite 200712159 is its exceptional output capacity. With the ability to handle significant load requirements, it ensures that all your essential devices can be powered simultaneously without compromising performance. This capability is particularly beneficial for RV users who rely on multiple devices, such as refrigerators, laptops, and entertainment systems, while on the road.

The device also boasts advanced surge protection technology, safeguarding connected equipment from transient voltage spikes, which can occur due to lightning strikes or power surges. This feature provides peace of mind, particularly when traveling through areas with unstable power sources. In addition, the unit is designed with rugged durability in mind, featuring a weather-resistant casing that protects it from the elements. This characteristic makes it perfect for outdoor use, where exposure to moisture and changing temperatures can be a concern.

The Tripp Lite 200712159 is also incredibly user-friendly. It includes an intuitive interface with LED indicators, allowing users to easily monitor power status and load capacity. This interface helps ensure users can operate the device efficiently, reducing the risk of overload situations. Furthermore, the compact design of the unit makes it easy to transport and store, which is a vital consideration for RV travelers who often have limited space.

A notable characteristic of this power solution is its compatibility with a wide range of devices. From laptops and smartphones to larger appliances, the Tripp Lite 200712159 can accommodate various power needs, making it an ideal choice for camping trips, tailgating events, and more.

In conclusion, the Tripp Lite 200712159 93-2768 RV stands out as a highly functional power supply that combines robustness, safety features, and user-centric design. Its impressive versatility and ability to handle substantial demands make it a must-have for anyone looking to enhance their outdoor experiences or streamline their RV adventures. With this power solution at your disposal, you can confidently enjoy all your electronic devices, no matter where the road takes you.
Top Page Image Contents