Snapper 0799-20, 0779-20 Specific Safety Rules, Symbology, Functional Description, Specifications

SPECIFIC SAFETY RULES

1.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

2.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

3.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paint

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Symbology

Volts Direct Current

Impacts per Minute Under

Load (IPM)

Underwriters Laboratories,

Inc., United States and

Canada

4

		FUNCTIONAL DESCRIPTION
1.	1/2" drive shank	7	6
2.	Forward/Reverse switch
3.	Trigger		Cat. No. 0779-20

4.Battery pack

5.Battery pack release buttons

6.Tool hanger

7.Tool hanger ring

8. 7/16" hex quick-change chuck 1

2

3

5

4

8

Cat. No. 0799-20

Specifications

	Volts	No Load		Impacts	Average
Cat.			Drive	Per	Torque
No.	DC	RPM	Shank	Minute	Output*
0779-20	28	0 - 1450	1/2"	0 - 2450	325 ft-lbs.*
0799-20	28	0 - 1450	7/16" Hex	0 - 2450	325 ft-lbs.*

*Output rated at full speed

Drilling Capacities

Cat. No.	Quick Change Auger Bits	Selfeed Bits
0779-20	1-1/2"	2-9/16"
0799-20	1-1/2"	2-9/16"

5