InFocus EC 10SB (SL) instruction manual Service and Repairs, OIL Type

Page 11

Drain cap

Fig. 8

Pour oil into the hole of the dipstick.

To the level indicated on the dipstick (Refer to Fig. 4).

For oil replacement, follow the table below.

OIL TYPE

SAE 5W50 SYNTHETIC OIL (–20°+120°F) For both summer and winter use

SAE 10W40 MULTI-GRADED OIL (+50°+120°F)

For warm weather use only

(2)Check the oil level of the pumping element every 50 hours or once a week.

(3)Change the oil every 300 working hours or every 6 months.

SERVICE AND REPAIRS

All quality compressors will eventually require servicing or replacement of parts because of wear from normal use. To assure that only authorized replacement parts will be used, all service and repairs must be performed by a

HITACHI AUTHORIZED SERVICE CENTER, ONLY.

NOTE:Specifications are subject to change without any obligation on the part of the HITACHI.

— 11 —

Image 11
Contents Model EC 10SB SL EC Important Information Meanings of Signal WordsOperation and Maintenance SafetyDisconnect the Compressor Keep Work Area CleanNever Touch Moving Parts Always Wear ProtectionDo not Modify the Compressor Keep Motor AIR Vent CleanKeep ALL SCREWS, Bolts and Covers Tightly in Place Operate Compressor AT the Rated VoltageGrounding Instructions Replacement PartsSafety Valve Must Work Properly Minimum Gage for Cord Sets Extension CordName of Parts Operation and MaintenancePrior to Operation SpecificationsAccessory Standard AccessoryOperation TransportShutdown MaintenanceOIL Type Service and RepairsPage EC10SBSL Page EC12 Page Page 312