InFocus EC 10SB (SL) Never Touch Moving Parts, Always Wear Protection, Disconnect the Compressor

Page 3

SAFETY

IMPORTANT SAFETY INSTRUCTIONS

FOR USE OF THE COMPRESSOR

WARNING: Death or serious bodily injury could result from improper or unsafe use of compressor. To avoid these risks, follow these basic safety instructions:

READ ALL INSTRUCTIONS

1.NEVER TOUCH MOVING PARTS.

Never place your hands, fingers or other body parts near the compressor’s moving parts.

Never insert your fingers or other objects into the housing's ventilator. Such an action invites the danger of injuries or electric shocks.

2.NEVER OPERATE WITHOUT ALL GUARDS IN PLACE. Never operate this compressor without all guards or safety features in place and in proper working order. If maintenance or servicing requires the removal of a guard or safety features, be sure to replace the guard or safety features before resuming operation of the compressor.

3.ALWAYS WEAR PROTECTION.

Risk of injury. Always wear ANSI Z87.1 safety glasses or equivalent eye protection. Compressed air must never be aimed at anyone or any part of the body.Use ear protection as air flow noise is loud when draining.

4.PROTECT YOURSELF AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces such as pipes, radiators, ranges and refrigeration enclosures. This compressor must be properly grounded. Never operate the compressor in damp or wet locations.

To reduce risk of electric shock, do not remove cover.

5.DISCONNECT THE COMPRESSOR.

Always disconnect the compressor from the power source and remove the compressed air from the air tank before servicing, inspecting, maintaining, cleaning, replacing or checking any parts.

6.AVOID UNINTENTIONAL STARTING.

Do not carry the compressor while it is connected to its power source or when the air tank is filled with compressed air. Be sure the knob of the pressure switch in the “OFF” position before connecting the compressor to its power source.

7.STORE COMPRESSOR PROPERLY.

When not in use, the compressor should be stored in indoor dry place. Keep out of reach of children. Lock- out the storage area.

8.KEEP WORK AREA CLEAN.

Cluttered areas invite injuries. Clear all work areas of unnecessary tools, debris, furniture, etc.

9.CONSIDER WORK AREA ENVIRONMENT.

Risk of electric shock. Don’t expose compressor to rain. Don’t use compressor in damp or wet locations. Keep work area well lit and well ventilated.

Risk of fire or explosion. Do not carry and operate the compressor or any other electrical device near the spray area. Don’t use compressor in the presence of flammable liquids or gases.

Compressor produces sparks during operation. Never use compressor in sites containing lacquer, paint, benzine, thinner, gasoline, gases, adhesive agents, and other materials which are combustible or explosive.

10.KEEP CHILDREN AWAY.

Do not let visitors contact compressor extension cord. All visitors should be kept safely away from work area.

11.DRESS PROPERLY.

Do not wear loose clothing or jewelry. They can be caught in moving parts.

Wear protective hair covering to contain long hair.

12.DON’T ABUSE CORD.

Never yank it to disconnect from receptacle. Keep cord from heat, oil and sharp edges.

.

13.MAINTAIN COMPRESSOR WITH CARE. Follow instructions for lubricating.

Inspect cords periodically and if damaged, have repaired by authorized service center. Inspect extension cords periodically and replace if damaged.

14.OUTDOOR USE EXTENSION CORDS.

When compressor in used outdoors, use only extension cords intended for use outdoors and so marked.

15.STAY ALERT.

Watch what you are doing. Use common sense. Do not operate compressor when you are tired. Compressor should never be used by you if you are under the influence of alcohol, drugs or medication that makes you drowsy.

— 3 —

Image 3
Contents Model EC 10SB SL EC Important Information Meanings of Signal WordsOperation and Maintenance SafetyDisconnect the Compressor Keep Work Area CleanNever Touch Moving Parts Always Wear ProtectionDo not Modify the Compressor Keep Motor AIR Vent CleanKeep ALL SCREWS, Bolts and Covers Tightly in Place Operate Compressor AT the Rated VoltageReplacement Parts Safety Valve Must Work ProperlyGrounding Instructions Minimum Gage for Cord Sets Extension CordName of Parts Operation and MaintenancePrior to Operation SpecificationsAccessory Standard AccessoryOperation TransportShutdown MaintenanceOIL Type Service and RepairsPage EC10SBSL Page EC12 Page Page 312