Hitachi C 10LA English Attach auxiliary fence to rip fence with two C, Clamps. Fig. CC

Page 22

English

 

Attach auxiliary fence to rip fence with two “C”

Fig. DD

clamps. (Fig. CC)

 

Fig. CC

 

2

1

3

DADO CUTS (FIG. DD)

1.The dado blade insert is included with this saw. Remove the saw blade, original table insert and blade guard. Install the dado and dado blade insert.

2.Instruction for operating the dado is packed with the separately purchased dado set.

3.The arbor (1) on this saw restricts the maximum width of the cut to 13/16”.

4.When making full 13/16” dado cuts, it is not necessary to install the outside fl ange (2) before screwing on the arbor nut (3). Make sure that the arbor nut (3) is tight, and that at least one thread of the arbor sticks out past the nut.

5.Do not exceed 8” diameter dadoes and keep the width 13/16” or less. It will be necessary to remove the blade guard and splitter when using a dado blade. Always use caution when operating a dado blade.

6.Use only the correct number of round outside blades and inside chippers as shown in the dado set’s instruction manual. Blade or chipper must not exceed 13/16”.

7.Check saw to ensure that the dado will not strike the housing, insert, or motor when in operation.

WARNING

For your own safety, always replace the blade, blade guard assembly, and blade insert when you are finished with the dado operation.

– 22 –

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Mode D’EMPLOI ET Instructions DE Securite Contents Product Specifications Motor SAWPower Tool Safety EnglishTable SAW Safety Electrical Requirements and Safety Tools Needed for Assembly Accessories and AttachmentsCarton Contents Unpacking Your Stationary Table SAW Know Your Stationary Table SAW Woodworking Terms Glossary of TermsHitachi Professional Table SAW Terms Blade Elevation Handwheel RaisesAssembly the Front and Rear Table Rail FIG. B-1, B-2 Assembly and AdjustmentsAssembly the Table Extension FIG. B Assembly the front rail Fig. B-1Blade Guard Assembly FIG. E, F English Assembly the rear table rail Fig. B-2Assembly the Rear Table Extension FIG. C Blade Raising Handwheel FIG. DAligning the Blade Guard Splitter FIG. F Fig. FInstalling a Blade FIG. G Removing the Blade FIG. GBlade Tilting Indicator FIG. J Adjusting the 90O and 45O Positive Stops FIG. H, H-190O Stop Fig. H, H-1 Miter Gauge Adjustment FIG. N Storage FIG. L, M Installing the Table Insert FIG. KPower Cord FIG. M Rip fence and miter gauge Fig. LRIP Fence Indicator FIG. Q RIP Fence Adjustment FIG. ORIP Fence Operation Operation Basic SAW OperationsBevel Ripping Cutting OperationsRipping FIG. T, U Ripping Small PiecesTo prevent serious injury Using Wood Facing on the Miter Gauge FIG. WCrosscutting FIG Bevel Crosscutting FIGMiter CUT FIG. Z Using Wood Facing on the RIP Fence FIG. AACompound Miter Crosscutting FIG. Y Auxiliary Fence FIG. BBClamps. Fig. CC English Attach auxiliary fence to rip fence with two CDado Cuts FIG. DD Maintaining Your Table SAW MaintenanceGeneral Maintenance Blade Raising and Tilting Mechanism FIG. EESymptom Troubleshooting GuidePossible Causes Corrective Action Push Stick Construction Parts List Description SizeStationary Table SAW Model NO. C10LA Schematic 120V & 240V Wire Wirding Hitachi Koki Canada Co

C 10LA specifications

The Hitachi C 10LA is a powerful and versatile miter saw that stands out in the realm of woodworking and construction tools. Known for its precision, efficiency, and durability, this saw is designed to meet the needs of both professional contractors and DIY enthusiasts.

One of the main features of the Hitachi C 10LA is its robust 15-amp motor, which delivers a remarkable no-load speed of up to 5,000 RPM. This high-speed capability allows users to make clean and accurate cuts through various materials, including hardwood, softwood, and even composite materials. The saw’s large cutting capacity provides a maximum miter cut of 52 degrees to the right and 45 degrees to the left, along with a maximum bevel cut of 45 degrees. This range of motion makes it ideal for creating precise angled cuts, commonly required for crown molding and other intricate woodworking projects.

The C 10LA also features a unique laser marker system that enhances cutting accuracy. This technology projects a laser line onto the workpiece, indicating exactly where the blade will cut, thereby eliminating guesswork and reducing the risk of errors. Additionally, the saw is equipped with a large, sturdy base, providing stability during use and reducing vibration for smoother operation.

Safety is a significant consideration in the design of the Hitachi C 10LA. It includes an electric brake that halts the blade almost instantly after the trigger is released, ensuring that users can operate the saw with confidence. Its dust collector attachment helps maintain a clean work environment by capturing sawdust and debris, which not only improves visibility but also promotes a safer workspace.

The C 10LA’s lightweight design, weighing approximately 26.3 lbs, coupled with a comfortable handle, makes it easy to transport and maneuver, whether in a workshop or on a job site. The saw is also designed for easy blade changes and maintenance, further enhancing its usability and convenience.

In summary, the Hitachi C 10LA miter saw combines powerful performance with advanced features, making it a reliable choice for tradespeople and hobbyists alike. With its high-speed motor, accurate laser guide, impressive cutting capacity, and safety features, it is well-equipped to handle a wide variety of cutting tasks with precision and ease.
Top Page Image Contents