Hitachi C 10LA instruction manual Maintaining Your Table SAW, General Maintenance, Lubrication

Page 23

English

MAINTENANCE

MAINTAINING YOUR TABLE SAW

GENERAL MAINTENANCE

WARNING

For your own safety, turn the switch OFF and remove the switch key. Remove the plug from the power source outlet before maintaining or lubricating your saw.

1.Clean out all sawdust that has accumulated inside the saw cabinet and the motor.

2.Polish the saw table with an automotive wax to keep it clean and to make it easier to slide the workpiece.

3.Clean cutting blades with pitch and gum remover.

4.A worn, cut, or damaged power cord should be replaced immediately.

WARNING

All electrical or mechanical repairs should be attempted only by a trained repair technician. Contact Hitachi Authorized Service Center for service. Use only identical replacement parts. Any other parts may create a hazard.

5.Use liquid dish washing detergent and water to clean all plastic parts.

NOTE: Certain cleaning chemicals can damage plastic parts.

6.Avoid use of cleaning chemicals or solvents, ammonia and household detergents containing ammonia.

BLADE RAISING AND TILTING MECHANISM (FIG. EE)

After each fi ve hours of operation, the blade raising mechanism and tilting mechanism should be checked for looseness, binding, or other abnormalities.

1.With the saw disconnected from the power source, turn the saw upside down and alternately pull upward and downward on the motor unit.

2.Observe any movement of the motor mounting mechanism. Looseness or play in the blade raising screw rod (1) should be limited to 1/8” or less.

3.If excessive looseness is observed in any other part of the blade raising mechanism or tilting mechanism, contact Hitachi Authorized Service Center immediately.

–23

Fig. EE

2

Place a small amount of dry lubricant on the bevel gear (2). The screw rod (1) must be kept clean and free of sawdust, gum, pitch, and other contaminants for smooth operations.

If excessive looseness is observed in any parts of the blade raising mechanism or tilting mechanism, contact Hitachi Authorized Service Center immediately.

LUBRICATION

All motor bearings are permanently lubricated at the factory and require no additional lubrication.

On all mechanical parts of your table saw where a pivot or threaded rod are present, lubricate using graphite or silicone. These dry lubricants will not hold sawdust as would oil or grease.

–

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Mode D’EMPLOI ET Instructions DE Securite Contents Motor SAW Product SpecificationsEnglish Power Tool SafetyTable SAW Safety Electrical Requirements and Safety Carton Contents Accessories and AttachmentsTools Needed for Assembly Unpacking Your Stationary Table SAW Know Your Stationary Table SAW Blade Elevation Handwheel Raises Glossary of TermsHitachi Professional Table SAW Terms Woodworking TermsAssembly the front rail Fig. B-1 Assembly and AdjustmentsAssembly the Table Extension FIG. B Assembly the Front and Rear Table Rail FIG. B-1, B-2Blade Raising Handwheel FIG. D English Assembly the rear table rail Fig. B-2Assembly the Rear Table Extension FIG. C Blade Guard Assembly FIG. E, FFig. F Aligning the Blade Guard Splitter FIG. FRemoving the Blade FIG. G Installing a Blade FIG. G90O Stop Fig. H, H-1 Adjusting the 90O and 45O Positive Stops FIG. H, H-1Blade Tilting Indicator FIG. J Rip fence and miter gauge Fig. L Installing the Table Insert FIG. KPower Cord FIG. M Miter Gauge Adjustment FIG. N Storage FIG. L, MRIP Fence Operation RIP Fence Adjustment FIG. ORIP Fence Indicator FIG. Q Basic SAW Operations OperationRipping Small Pieces Cutting OperationsRipping FIG. T, U Bevel RippingBevel Crosscutting FIG Using Wood Facing on the Miter Gauge FIG. WCrosscutting FIG To prevent serious injuryAuxiliary Fence FIG. BB Using Wood Facing on the RIP Fence FIG. AACompound Miter Crosscutting FIG. Y Miter CUT FIG. ZDado Cuts FIG. DD English Attach auxiliary fence to rip fence with two CClamps. Fig. CC Blade Raising and Tilting Mechanism FIG. EE MaintenanceGeneral Maintenance Maintaining Your Table SAWPossible Causes Corrective Action Troubleshooting GuideSymptom Push Stick Construction Description Size Parts ListStationary Table SAW Model NO. C10LA Schematic 120V & 240V Wire Wirding Hitachi Koki Canada Co

C 10LA specifications

The Hitachi C 10LA is a powerful and versatile miter saw that stands out in the realm of woodworking and construction tools. Known for its precision, efficiency, and durability, this saw is designed to meet the needs of both professional contractors and DIY enthusiasts.

One of the main features of the Hitachi C 10LA is its robust 15-amp motor, which delivers a remarkable no-load speed of up to 5,000 RPM. This high-speed capability allows users to make clean and accurate cuts through various materials, including hardwood, softwood, and even composite materials. The saw’s large cutting capacity provides a maximum miter cut of 52 degrees to the right and 45 degrees to the left, along with a maximum bevel cut of 45 degrees. This range of motion makes it ideal for creating precise angled cuts, commonly required for crown molding and other intricate woodworking projects.

The C 10LA also features a unique laser marker system that enhances cutting accuracy. This technology projects a laser line onto the workpiece, indicating exactly where the blade will cut, thereby eliminating guesswork and reducing the risk of errors. Additionally, the saw is equipped with a large, sturdy base, providing stability during use and reducing vibration for smoother operation.

Safety is a significant consideration in the design of the Hitachi C 10LA. It includes an electric brake that halts the blade almost instantly after the trigger is released, ensuring that users can operate the saw with confidence. Its dust collector attachment helps maintain a clean work environment by capturing sawdust and debris, which not only improves visibility but also promotes a safer workspace.

The C 10LA’s lightweight design, weighing approximately 26.3 lbs, coupled with a comfortable handle, makes it easy to transport and maneuver, whether in a workshop or on a job site. The saw is also designed for easy blade changes and maintenance, further enhancing its usability and convenience.

In summary, the Hitachi C 10LA miter saw combines powerful performance with advanced features, making it a reliable choice for tradespeople and hobbyists alike. With its high-speed motor, accurate laser guide, impressive cutting capacity, and safety features, it is well-equipped to handle a wide variety of cutting tasks with precision and ease.
Top Page Image Contents