Dometic 3400, 3300 Important Information Before Operation, Electronic Flush and Forget Operation

IMPORTANT INFORMATION BEFORE OPERATION

1.Fill freshwater tank and add deodorant to holding tank through toilet bowl.

2.Make sure all guests understand the operation of the toilet system. 3300 models: This flushing instruction label is located under the seat, and is easily read when the seat is raised. 3400 models: "Add Water" and "Flush" are clearly marked on the remote switch.

3.Shut off the toilet system before servicing and do not leave the vehicle with toilet system circuit breaker on.

4.Never use drain openers, alcohol, solvents, etc. in the toilet.

5.If the toilet does not function properly, refer to the Troubleshooting section of this manual and repair as neces- sary. If problem persists, contact your local SeaLand product dealer or see the Customer Service section of this manual.

ELECTRONIC FLUSH AND FORGET® OPERATION

FLUSH HANDLE TOILET

REMOTE FLUSH	DO NOT FLUSH
SWITCH TOILET	FOREIGN OBJECTS

1.To add water to the toilet before using (if neces- sary), raise flush handle until desired water level is reached. (Water flow will stop automatically after a pre-programmed period of time).

2.To flush toilet, press flush handle down. Water will flow into bowl for two sec- onds, then flush ball will open. Toilet will not flush again until water refill cycle is complete.

THROUGH TOILET

1.To add water to bowl, press top part of switch.

2.To flush, press bottom part of switch.

Do not dispose of san- itary napkins or other non-dissolving items in toilet, such as facial tissue or paper towels. These items can cause plugging of the system.

TOILET CONTROLS

ADD WATER	ACCESS COVER
	REMOTE FLUSH SWITCH
TO BOWL	(3400 models)
	CONTROL
OFF	SWITCH
FLUSH HANDLE
(3300 models)
OFF

FLUSH

Figure 1

8