ASSEMBLY INSTRUCTIONS
1.CAUTION! Always make sure the Compressor’s Pressure Switch (63) is in its “STOP” position prior to performing any service, maintenance, or cleaning of the Compressor.
REGULATOR
AIR
COMPRESSOR
TO
TOOL
|
|
|
|
|
FIGURE C | OILER | WATER | ||
|
| FILTER | ||
|
|
| ||
2.To extend the life of your tools and equipment, it is recommended that you install an oiler and water filter
Outlet Valve (67) of the Air Compressor.
(See Figure C.)
3. | Prior to using the Air Compressor, the unit | AIR OUTLET |
| requires the attachment of a | VALVE (67) |
|
| |
| Female Quick Connector (not included). To |
|
| do so, wrap approximately 3” of pipe thread |
|
| sealant tape (not included) around the male |
|
| threads of the Air Outlet Valve (67). Then | QUICK |
| firmly screw the Quck Connector into the Air | CONNECTOR |
| (NOT INCLUDED) | |
| Outlet Valve (67). (See Figure D.) |
|
|
| FIGURE D |
07d
SKU 95499 | For technical questions, please call | Page 8 |