Harbor Freight Tools 95499 warranty PRE-START Instructions Adding Compressor Oil, See Figure E

PRE-START INSTRUCTIONS – Adding Compressor Oil

1.IMPORTANT! Prior to first using the Compressor, the Compressor MUST be filled with a high quality S.A.E. 15W-30Wgrade non-detergent compressor oil.

FIGURE E

OIL BREATHER CAP

(24)

OIL SIGHT GLASS

(21)

Desired Level

2.To do so, unscrew and remove the Oil Breather Cap (24). Pour approximately 1/2 quart of compressor oil into the Oil Breather Cap hole. Do not overfill.

(See Figure E.)

3.Observe the level of compressor oil through the Oil Sight Glass (21). The optimal oil level is at the center of the glass.

4.When finished adding compressor oil, re-install the Oil Breather Cap (24) back into the Oil Breather Cap hole. (See Figure E.)

SKU 95499 For technical questions, please call 1-800-444-3353. Page 9