Harbor Freight Tools 95498 Product Specifications, Save this Manual, Work Area, Personal Safety

Page 2

PRODUCT SPECIFICATIONS

Electrical Requirements

120 V~ / 60 Hz / 16 A / 2 HP Motor / 3400 RPM

Maximum Air Pressure

115 PSI

Air Flow Capacity

5.8 Cubic Feet Per Minute (CFM) @ 40 PSI

 

4.4 Cubic Feet Per Minute (CFM) @ 90 PSI

Auto Turn On/Shut Off

Pressure On @ 85 PSI / Pressure Off @ 115 PSI

Air Tank Capacity

4 Gallons Total

Air Outlet Size

1/4”-18 NPT Male Threads

Recommended Oil Type

SAE 15W-30W Non-Detergent Compressor Oil

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future refer- ence.

GENERAL SAFETY RULES AND PRECAUTIONS

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2.Do not operate air tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create

sparks which may ignite the dust or fumes.

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. Children should not be allowed in the work area.

PERSONAL SAFETY

1.Stay alert. Watch what you are doing, and use common sense when operat- ing a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

REV 07b;07h; 09c; 09g

SKU 95498

For technical questions, please call 1-800-444-3353.

Page 2

Image 2
Contents Your Warranty Is Voided If For technical questions or replacement parts, please callPersonal Safety Product SpecificationsGeneral Safety Rules and Precautions Save this ManualService Tool USE and CareSpecific Safety Rules and Precautions For technical questions, please call Grounding Symbology UnpackingAssembly Instructions See Figure DSee Figure E PRE-START InstructionsTo Add Compressor Oil Operating Instructions To Start The CompressorTo Stop The Compressor SKU For technical questions, please callProblem Possible Cause INSPECTION, MAINTENANCE, and CleaningTroubleshooting Part Description Parts ListPlease Read the Following Carefully SKU 95498 For technical questions, please callAssembly Diagram Limited 1 year / 90 day Warranty