Harbor Freight Tools 95498 operating instructions Assembly Instructions, See Figure D

ASSEMBLY INSTRUCTIONS

1.Turn the Compressor’s Pressure Switch (64) is in its “OFF” position prior to per- forming any service, maintenance, or cleaning of the Compressor.

2.To extend the life of your tools and equipment, it is recommended that you install an oiler and water filter in-line with the Air Outlet Valve (68) of the Air Com- pressor. (See Figure C.)

WRAP	AIR OUTLET VALVE
WITH	(68)
PIPE SEALANT TAPE
(NOT INCLUDED)
HERE

QUICK CONNECTOR

(NOT INCLUDED)

FIGURE D

3.Prior to using the Air Compressor, the unit requires the attachment of a 1/4”-18 NPT Male Quick Connector (not included). To do so, wrap approximately 3” of pipe thread sealant tape (not included) around the male threads of the Quick Con- nector. Then firmly screw the Quick Connector into the Air Outlet Valve (68).

(See Figure D.)

SKU 95498 For technical questions, please call 1-800-444-3353. Page 8