must be replaced only by a qualified |
|
Draining Moisture from the Tank | |
service technician. | Back of Compressor |
|
Maintenance Schedule
Following are general guidelines for maintenance checks of the Air Compressor.
Note: The environment in which the compressor is used, and the frequency of use can affect how often you will need to check the Air Compressor components and perform maintenance procedures.
Daily:
a. Make sure all nuts and bolts are tight. b. Drain moisture from air tank.
c. Check for abnormal noise or vibration. d. Check for air leaks.1
e. Wipe off any oil or dirt from the compressor.2
Monthly:
a. Inspect Safety Valve.
Drain Valve (107)
Closed
Open
Figure 6
The Drain Valve is located under the Tank. It must be accessed daily to release all trapped air and moisture from the Tank. This will eliminate condensation which can cause internal tank corrosion.
To empty the air and condensation:
1.Switch the compressor off.
2.Place a collection pan under the Drain Valve.
3.Open the Drain Valve.
4.Holding the compressor Handle (515), tilt the compressor toward the Drain Valve and drain all moisture into the collection pan.
1To check for air leaks, apply soapy water to joints while the Air Compressor is pressurized. Look for air bubbles.
2To clean the compressor surface, wipe with a damp cloth, using a mild detergent or mild solvent.
5.When all the pressure and moisture is released, close the Drain Valve.
SKU 67696 | For technical questions, please call | Page 11 |
68149 |
|
|