Specifications
Electrical | 120 V~ / 60 Hz / 10 A | |
Requirements | ||
| ||
Running HP | 1.5 HP | |
|
| |
Air Outlet Size | 1/4” | |
|
| |
Coupler | Female | |
Coupler | ||
| ||
Air Pressure | Auto | |
Restart @ 120 PSI | ||
| ||
Air Tank Capacity | 6 Gallons | |
Air Flow Capacity | 2.5 SCFM @ 90 PSI | |
3.4 SCFM @ 40 PSI | ||
Pump | Single stage | |
Line Cord | 6’10” x 14 AWG with | |
plug | ||
| ||
Thermal | Motor equipped with overheat | |
Protection | auto shutdown | |
Sound Level | 90 Db (A) |
NOTE: Allow adequate time when filling tires. The larger the tire, the more time to fill is needed.
NOTE: This product is designed for inflation, stapling, brad nailing and air brushing.
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
To prevent serious injury
from accidental operation:
Turn the Power Switch “OFF”, unplug the Compressor from its electrical outlet, and release all air pressure from the air tank before assembling or making any adjustments to the compressor.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Functions
Safety Valve Regulator
(110)Knob
| Output Air | |
Power | Pressure | |
Gauge (109) | ||
Switch | ||
| ||
(133) |
| |
Tank Air | Air Outlet | |
| ||
Pressure |
| |
Gauge (109) | (Back of Compressor) | |
| ||
| Drain Valve | |
| (107) | |
Figure 1 |
|
Instructions for putting
into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Compressor Area Set Up
1.Designate a work area that is clean and
2.Locate the Compressor on a flat level surface to prevent tipping and damage. Keep at least 12” of space around the unit to allow air circulation.
SKU 67696 | For technical questions, please call | Page 7 |
68149 |
|
|